Even after so many distro releases, in PHP v5.5.9 and libcurl v7.35.0, curl_multi_select still returns -1. The only work around here is to wait and proceed like nothing ever happened. You have to determine the "wait" required here.
In my application a very small interval like usleep(1) worked. For example:
<?php
// While we're still active, execute curl
$active = null;
do {
$mrc = curl_multi_exec($multi, $active);
} while ($mrc == CURLM_CALL_MULTI_PERFORM);
while ($active && $mrc == CURLM_OK) {
// Wait for activity on any curl-connection
if (curl_multi_select($multi) == -1) {
usleep(1);
}
// Continue to exec until curl is ready to
// give us more data
do {
$mrc = curl_multi_exec($multi, $active);
} while ($mrc == CURLM_CALL_MULTI_PERFORM);
}
?>
Internally php curl_multi_select uses libcurl curl_multi_fdset function and its libcurl documentation says :
http://curl.haxx.se/libcurl/c/curl_multi_fdset.html
"When libcurl returns -1 in max_fd, it is because libcurl currently does something that isn't possible for your application to monitor with a socket and unfortunately you can then not know exactly when the current action is completed using select(). When max_fd returns with -1, you need to wait a while and then proceed and call curl_multi_perform anyway. How long to wait? I would suggest 100 milliseconds at least, but you may want to test it out in your own particular conditions to find a suitable value.
When doing select(), you should use curl_multi_timeout to figure out how long to wait for action."
Untill PHP implements curl_multi_timeout() we have to play with our application and determine the "wait".
PHP - Manual: curl_multi_select
2024-12-21
curl_multi_select
(PHP 5, PHP 7, PHP 8)
curl_multi_select — 等待所有cURL批处理中的活动连接
说明
curl_multi_select(resource
$mh, float $timeout = 1.0): int阻塞直到cURL批处理连接中有活动连接。
返回值
成功时返回描述符集合中描述符的数量。失败时，select失败时返回-1，否则返回超时(从底层的select系统调用).
add a note
User Contributed Notes 9 notes
nevil85 at gmail dot com ¶
7 years ago
bishop at php dot net ¶
3 years ago
Before PHP 7.1.23 and 7.2.11, curl_multi_select() would return -1 if cURL had no open file descriptors. Since then, assuming libcurl 7.28 or higher, curl_multi_select() will return 0 if cURL has no open file descriptors and -1 on error.
See https://bugs.php.net/bug.php?id=76480
This is a BC break. See https://bugs.php.net/bug.php?id=77030
vigo dot von dot harrach at gmx dot de ¶
10 years ago
curl_multi_select($mh, $timeout) simply blocks for $timeout seconds while curl_multi_exec() returns CURLM_CALL_MULTI_PERFORM. Otherwise, it works as intended, and blocks until at least one connection has completed or $timeout seconds, whatever happens first.
For that reason, curl_multi_exec() should always be wrapped:
<?php
function full_curl_multi_exec($mh, &$still_running) {
do {
$rv = curl_multi_exec($mh, $still_running);
} while ($rv == CURLM_CALL_MULTI_PERFORM);
return $rv;
}
?>
With that, the core of "multi" processing becomes (ignoring error handling for brevity):
<?php
full_curl_multi_exec($mh, $still_running); // start requests
do { // "wait for completion"-loop
curl_multi_select($mh); // non-busy (!) wait for state change
full_curl_multi_exec($mh, $still_running); // get new state
while ($info = curl_multi_info_read($mh)) {
// process completed request (e.g. curl_multi_getcontent($info['handle']))
}
} while ($still_running);
?>
Note that after starting requests, retrieval is done in the background - one of the better shots at parallel processing in PHP.
public at grik dot net ¶
13 years ago
This function blocks the calling process until there is activity on any of the connections opened by the curl_multi interface, or until the timeout period has expired.
In other words, it waits for data to be received in the opened connections.
Internally it fetches socket pointers with "curl_multi_fdset()" and runs the "select()" C function.
It returns in 3 cases:
1. Activity is detected on any socket;
2. Timeout has ended (second parameter);
3. Process received any signal (#man kill).
The function returns an integer:
* In case of activity it returns a number, usually 1.
I suppose, it returns the number of connections with activity detected.
* If timeout expires it returns 0
* In case of error it returns -1
Thanks for attention, hope this helps.
Anonymous ¶
8 years ago
In 5.3.9+, curl_multi_select always returns -1. If this is your case, just wait a bit and then proceed like nothing ever happened:
<?php
do {
$mrc = curl_multi_exec($multi, $active);
} while ($mrc == CURLM_CALL_MULTI_PERFORM);
while ($active && $mrc == CURLM_OK) {
//check for results and execute until everything is done
if (curl_multi_select($multi) == -1) {
//if it returns -1, wait a bit, but go forward anyways!
usleep(100);
}
//do something with the return values
while(($info = curl_multi_info_read($multi)) !== false){
if ($info["result"] == CURLE_OK){
$content = curl_multi_getcontent($info["handle"]);
do_something($content);
}
}
do {
$mrc = curl_multi_exec($multi, $active);
} while ($mrc == CURLM_CALL_MULTI_PERFORM);
}
?>
xxavalanchexx at gmail dot com ¶
8 years ago
According to https://bugs.php.net/bug.php?id=61141:
On Windows setups using libcurl version 7.24 or later (which seems to correspond to PHP 5.3.10 or later), you may find that this always returns -1. This is, apparently, not strictly a bug: according to the libcurl documentation, you should add your own sleep if curl_multi_select returns -1.
For example:
<?php
/* setup $mh */
$active = null;
do {
$mrc = curl_multi_exec($mh, $active);
} while ($mrc == CURLM_CALL_MULTI_PERFORM);
while ($active && $mrc == CURLM_OK) {
if (curl_multi_select($mh) == -1) {
usleep(100);
}
do {
$mrc = curl_multi_exec($mh, $active);
} while ($mrc == CURLM_CALL_MULTI_PERFORM);
}
/* close $mh */
?>
Alex Palmer ¶
9 years ago
On php 5.3.18+ be aware that curl_multi_select() may return -1 forever until you call curl_multi_exec().
See https://bugs.php.net/bug.php?id=63411 for more information.
gib-o-master ¶
7 months ago
NOTE: current implementation of `curl_multi_select` doesn't block and doesn't respect timeout parameter (maybe will be fixed later, in this case just remove the usleep call)
here, i would like to post my working/tested example of proper usage of this function:
```
$running = 1;
while ($running)
{
# execute request
if ($a = curl_multi_exec($this->murl, $running)) {
throw BotError::text("curl_multi_exec[$a]: ".curl_multi_strerror($a));
}
# check finished
if (!$running) {
break;
}
# wait for activity
while (!$a)
{
if (($a = curl_multi_select($this->murl, $timeout)) < 0)
{
throw BotError::text(
($a = curl_multi_errno($this->murl))
? "curl_multi_select[$a]: ".curl_multi_strerror($a)
: 'system select failed'
);
}
usleep($timeout * 1000000);# should be <=1
}
}
```
Anonymous ¶
11 years ago
Since the docs are still lacking, here's an example of how to use the function. The following code will keep checking all active threads until one of them returns the HTTP 200 Ok status code, or simply end. On success, it will return the URL that worked.
<?php
$running=null;
do {
curl_multi_exec($mh,$running);
$ready=curl_multi_select($mh); // this will pause the loop
if($ready>0){
while($info=curl_multi_info_read($mh)){
$status=curl_getinfo($info['handle'],CURLINFO_HTTP_CODE);
if($status==200){
$successUrl=curl_getinfo($info['handle'],CURLINFO_EFFECTIVE_URL);
break 2;
}
}
}
} while ($running>0 && $ready!=-1);
?>
The question for the $ready variable is, if it will return the value before or after the timeout has occurred. From my tests it appears that it will return the value immediately, and only then pause the execution. That's because it's always zero the first time through the loop, even if the time limit is as high as 10sec. I've expected it to wait and only then return the value so that came unexpected to me.
As stated by someone else, it also doesn't seem to return the overall count of threads in the handle, but only that of the currently active ones.
官方地址：https://www.php.net/manual/en/function.curl-multi-select.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
数据库
JAVA
面试
NoSQL
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
广告
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
PHP 8.1
adodb手册
ADORecordSet对象
opcache预加载
Composer的Packagist资源
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
mysql面试题
PHP json解析（json_decode）页面工具
纯php实现DES以及TripleDES加密算法
两千行PHP学习笔记
支持php7的性能采集扩展
[原创]诡异的php-fpm超时问题
Packagist / Composer 中国全量镜像
php中几种注释规范