For all those of you which are "surprised" by the padding (even though it is mentioned in the description of the method) please do not just "strip away everything which I do not understand".
The approach with rtrim, rtrim "\0", removing all charcodes < 16, etc. are all wrong.
The PKCS #7 padding works just as described in RFC 5652.
To remove it, just look at the last byte of the message, and it will tell you how many bytes to remove.
For example, if the last byte is equal to \0A, then remove 10 bytes.
PHP - Manual: mdecrypt_generic
2024-12-22
mdecrypt_generic
(PHP 4 >= 4.0.2, PHP 5, PHP 7 < 7.2.0, PECL mcrypt >= 1.0.0)
mdecrypt_generic — 解密数据
警告
本函数已自 PHP 7.1.0 起废弃。强烈建议不要使用本函数。
说明
mdecrypt_generic(resource
$td, string $data): string解密数据。 请注意，由于存在数据补齐的情况， 返回字符串的长度可能和明文的长度不相等。
范例
示例 #1 mdecrypt_generic() 例程
<?php
/* 数据 */
$key = 'this is a very long key, even too long for the cipher';
$plain_text = 'very important data';
/* 打开加密模块，并且创建初始向量 */
$td = mcrypt_module_open('des', '', 'ecb', '');
$key = substr($key, 0, mcrypt_enc_get_key_size($td));
$iv_size = mcrypt_enc_get_iv_size($td);
$iv = mcrypt_create_iv($iv_size, MCRYPT_RAND);
/* 初始化加密句柄 */
if (mcrypt_generic_init($td, $key, $iv) != -1) {
/* 加密数据 */
$c_t = mcrypt_generic($td, $plain_text);
mcrypt_generic_deinit($td);
/* 为解密重新初始化缓冲区 */
mcrypt_generic_init($td, $key, $iv);
$p_t = mdecrypt_generic($td, $c_t);
/* 执行清理工作 */
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
}
if (strncmp($p_t, $plain_text, strlen($plain_text)) == 0) {
echo "ok\n";
} else {
echo "error\n";
}
?>
上例中演示了如何检测 解密后的数据是否和原始明文长度一致。 需要着重提醒的是，在对数据进行机密之前， 必须使用 mcrypt_generic_init() 函数来重新初始化缓冲区。
调用本函数之前， 必须使用密钥和初始向量来调用 mcrypt_generic_init() 函数 对解密句柄进行初始化。 加解密工作完成之后，需要调用 mcrypt_generic_deinit() 来释放加解密缓冲区。 例程请参见 mcrypt_module_open()。
参见
- mcrypt_generic() - 加密数据
- mcrypt_generic_init() - 初始化加密所需的缓冲区
- mcrypt_generic_deinit() - 对加密模块进行清理工作
add a note
User Contributed Notes 11 notes
jakub dot lopuszanski at nasza-klasa dot pl ¶
8 years ago
nytro_rst at yahoo dot com ¶
13 years ago
<?php
// Parameters:
// $text = The text that you want to encrypt.
// $key = The key you're using to encrypt.
// $alg = The algorithm.
// $crypt = 1 if you want to crypt, or 0 if you want to decrypt.
function cryptare($text, $key, $alg, $crypt)
{
$encrypted_data="";
switch($alg)
{
case "3des":
$td = mcrypt_module_open('tripledes', '', 'ecb', '');
break;
case "cast-128":
$td = mcrypt_module_open('cast-128', '', 'ecb', '');
break;
case "gost":
$td = mcrypt_module_open('gost', '', 'ecb', '');
break;
case "rijndael-128":
$td = mcrypt_module_open('rijndael-128', '', 'ecb', '');
break;
case "twofish":
$td = mcrypt_module_open('twofish', '', 'ecb', '');
break;
case "arcfour":
$td = mcrypt_module_open('arcfour', '', 'ecb', '');
break;
case "cast-256":
$td = mcrypt_module_open('cast-256', '', 'ecb', '');
break;
case "loki97":
$td = mcrypt_module_open('loki97', '', 'ecb', '');
break;
case "rijndael-192":
$td = mcrypt_module_open('rijndael-192', '', 'ecb', '');
break;
case "saferplus":
$td = mcrypt_module_open('saferplus', '', 'ecb', '');
break;
case "wake":
$td = mcrypt_module_open('wake', '', 'ecb', '');
break;
case "blowfish-compat":
$td = mcrypt_module_open('blowfish-compat', '', 'ecb', '');
break;
case "des":
$td = mcrypt_module_open('des', '', 'ecb', '');
break;
case "rijndael-256":
$td = mcrypt_module_open('rijndael-256', '', 'ecb', '');
break;
case "xtea":
$td = mcrypt_module_open('xtea', '', 'ecb', '');
break;
case "enigma":
$td = mcrypt_module_open('enigma', '', 'ecb', '');
break;
case "rc2":
$td = mcrypt_module_open('rc2', '', 'ecb', '');
break;
default:
$td = mcrypt_module_open('blowfish', '', 'ecb', '');
break;
}
$iv = mcrypt_create_iv(mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
$key = substr($key, 0, mcrypt_enc_get_key_size($td));
mcrypt_generic_init($td, $key, $iv);
if($crypt)
{
$encrypted_data = mcrypt_generic($td, $text);
}
else
{
$encrypted_data = mdecrypt_generic($td, $text);
}
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
return $encrypted_data;
}
?>
Ulysse ¶
8 years ago
Based on the information provided by "jakub dot lopuszanski at nasza-klasa dot pl" that in PKCS#7, the last byte contains the number of byte to remove (see RFC 5652, part 6.3), and for those like me who like to copy paste an already-made snippet:
<?php
function unpadPKCS7($data, $blocksize)
{
$last = substr($data, -1);
return substr($data, 0, strlen($data) - ord($last));
}
?>
Now you have no more reason to use rtrim() to remove the padding at the end of the result.
Anonymous ¶
13 years ago
Here's a quick snippet for removing PKCS7 padding:
<?php
function unpadPKCS7($data, $blockSize) {
$length = strlen ( $data );
if ($length > 0) {
$first = substr ( $data, - 1 );
if (ord ( $first ) <= $blockSize) {
for($i = $length - 2; $i > 0; $i --)
if (ord ( $data [$i] != $first ))
break;
return substr ( $data, 0, $i );
}
}
return $data;
}
?>
Peter Bailey ¶
10 years ago
We found that sometimes the resulting padding is not null characters "\0" but rather one of several control characters.
If you know your data is not supposed to have any trailing control characters "as we did" you can strip them like so.
<?php
$data = mdecrypt_generic( $cipher, $data );
// Strip trailing control-character padding
$data = preg_replace( "/\p{Cc}*$/u", "", $data );
?>
trashmail dot hashishin at gmail dot com ¶
12 years ago
Whenever you need to decrypt files encrypted with dot.net (and others?) you can use the following settings:
Encryption: 'rijndael-256'
Mode: 'cbc'
Padding-Mode: Zeros
iv: "yes"
encode the data with base64 to send them to your php script
robbie [at] averill [dot] co [dot] nz ¶
17 years ago
I have noticed that sometimes when the binary ciphertext is longer than the plaintext, the decrypted plaintext can have some little boxes/squares next to it as 'padding'. I also noticed that you can't cut and paste them to be able to edit them out, but i did find a solution.
Just call rtrim() around the string and it removes them.
Silvan ¶
14 years ago
It is generally not recommended to just use rtrim to remove the padding.
Use rtrim($str, "\0") for strings that do not end in "\0" or store the data length during encryption.
(Although data containing "\0" sometimes gets corrupted during encryption so these types of data actually should be packed.)
For example:
<?php
function encrypt($original_data)
{
$length = strlen($original_data);
$data_to_encrypt = $length.'|'.$original_data;
// Encrypt the data including its length.
// Do not save the length unencrypted, as this could be a (minor) security risk
}
function decrypt($cypher)
{
// Decrypt the cypher data first
// Next retrieve the original data
list($length, $padded_data) = explode('|', $decrypted_data, 2);
$original_data = substr($padded_data, 0, $length);
}
?>
php at pcwize dot com ¶
15 years ago
Just confirming the .DLL issues. With 4.3.4 you need the older .DLL. I'm guessing any version of PHP4 needs the older .DLL. With PHP5 you need the newer one.
drew at expressdynamics dot com ¶
16 years ago
On Win32 systems with PHP 5, you must use the newer libmcrypt.dll file, otherwise mdecrypt_generic will not work.
jon@jonroig dot com ¶
18 years ago
Here's a bit of encrypt/decrypt code.
If you're using this on the win32 platform, BEWARE! The latest DLL (19-Jan-2004) contains a bug that keeps mdecrypt_generic from functioning. Nearly drove me over the edge... The 30-Dec-2002 version seems to work with no trouble.
<?
$key = "this is a secret key";
$input = "Let us meet at 9 o'clock at the secret place.";
$td = mcrypt_module_open('tripledes', '', 'ecb', '');
$iv = mcrypt_create_iv (mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
mcrypt_generic_init($td, $key, $iv);
$encrypted_data = mcrypt_generic($td, $input);
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
echo "Encrypt: ".$encrypted_data;
echo "<br><br>";
$td = mcrypt_module_open('tripledes', '', 'ecb', '');
$iv = mcrypt_create_iv (mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
$key = substr($key, 0, mcrypt_enc_get_key_size($td));
mcrypt_generic_init($td, $key, $iv);
$decrypted_data = mdecrypt_generic($td, $encrypted_data);
echo "Decrypt: ".$decrypted_data;
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
?>
官方地址：https://www.php.net/manual/en/function.mdecrypt-generic.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
数据库
JAVA
面试
NoSQL
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
广告
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
ADORecordSet对象
adodb手册
opcache预加载
Composer的Packagist资源
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
PHP json解析（json_decode）页面工具
mysql面试题
php中几种注释规范
[原创]诡异的php-fpm超时问题
纯php实现DES以及TripleDES加密算法
php 修改图片大小
支持php7的性能采集扩展
PHP mkdir()写出来的权限与mode值不符合