It's not explicitly documented; number_format also rounds:
<?php
$numbers = array(0.001, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009);
foreach ($numbers as $number)
print $number."->".number_format($number, 2, '.', ',')."<br>";
?>
0.001->0.00
0.002->0.00
0.003->0.00
0.004->0.00
0.005->0.01
0.006->0.01
0.007->0.01
0.008->0.01
0.009->0.01
PHP - Manual: number_format
2024-12-21
number_format
(PHP 4, PHP 5, PHP 7, PHP 8)
number_format — 以千位分隔符方式格式化一个数字
说明
number_format(float
$number, int $decimals = 0): stringnumber_format(
float
int
string
string
): string
float
$number,int
$decimals = 0,string
$dec_point = ".",string
$thousands_sep = ","): string
本函数可以接受1个、2个或者4个参数（注意：不能是3个）:
如果只提供第一个参数，number的小数部分会被去掉
并且每个千位分隔符都是英文小写逗号","
如果提供两个参数，number将保留小数点后的位数到你设定的值，其余同楼上
如果提供了四个参数，number
将保留decimals个长度的小数部分,
小数点被替换为dec_point，千位分隔符替换为thousands_sep
参数
-
number -
你要格式化的数字
-
decimals -
要保留的小数位数
-
dec_point -
指定小数点显示的字符
-
thousands_sep -
指定千位分隔符显示的字符
返回值
格式化以后的 number.
更新日志
| 版本 | 说明 |
|---|---|
| 5.4.0 |
This function now supports multiple bytes in
dec_point and
thousands_sep. Only the first byte of each
separator was used in older versions.
|
范例
示例 #1 number_format() Example
For instance, French notation usually use two decimals, comma (',') as decimal separator, and space (' ') as thousand separator. The following example demonstrates various way to format a number:
<?php
$number = 1234.56;
// english notation (default)
$english_format_number = number_format($number);
// 1,235
// French notation
$nombre_format_francais = number_format($number, 2, ',', ' ');
// 1 234,56
$number = 1234.5678;
// english notation without thousands separator
$english_format_number = number_format($number, 2, '.', '');
// 1234.57
?>
更新日志
| 版本 | 说明 |
|---|---|
| 7.2.0 |
number_format() 现在无法返回 -0，之前可能返回 -0，因为 number 可能会是 -0.01。
|
add a note
User Contributed Notes 35 notes
thomas at weblizards dot de ¶
13 years ago
james at bandit dot co.nz ¶
13 years ago
Outputs a human readable number.
<?php
# Output easy-to-read numbers
# by james at bandit.co.nz
function bd_nice_number($n) {
// first strip any formatting;
$n = (0+str_replace(",","",$n));
// is this a number?
if(!is_numeric($n)) return false;
// now filter it;
if($n>1000000000000) return round(($n/1000000000000),1).' trillion';
else if($n>1000000000) return round(($n/1000000000),1).' billion';
else if($n>1000000) return round(($n/1000000),1).' million';
else if($n>1000) return round(($n/1000),1).' thousand';
return number_format($n);
}
?>
Outputs:
247,704,360 -> 247.7 million
866,965,260,000 -> 867 billion
MarcM ¶
16 years ago
For Zero fill - just use the sprintf() function
$pr_id = 1;
$pr_id = sprintf("%03d", $pr_id);
echo $pr_id;
//outputs 001
-----------------
$pr_id = 10;
$pr_id = sprintf("%03d", $pr_id);
echo $pr_id;
//outputs 010
-----------------
You can change %03d to %04d, etc.
stm555 at hotmail dot com ¶
17 years ago
I ran across an issue where I wanted to keep the entered precision of a real value, without arbitrarily rounding off what the user had submitted.
I figured it out with a quick explode on the number before formatting. I could then format either side of the decimal.
<?php
function number_format_unlimited_precision($number,$decimal = '.')
{
$broken_number = explode($decimal,$number);
return number_format($broken_number[0]).$decimal.$broken_number[1];
}
?>
sgj at dr dot com ¶
19 years ago
Just an observation:
The number_format rounds the value of the variable.
$val1 = 1.233;
$val2 = 1.235;
$val3 = 1.237;
echo number_format($val1,2,",","."); // returns: 1,23
echo number_format($val2,2,",","."); // returns: 1,24
echo number_format($val3,2,",","."); // returns: 1,24
Lio ¶
4 years ago
Be carreful, when you're using French notation
means : number_format(124.25, 2 , ',' , ' ') with ',' as dec_point,
Don't forget to specify thousands_sep that default is ',' to another value, otherwise function will return null.
tomislav at firmus-grupa dot hr ¶
9 years ago
When apply number_format on number with separator on thousands, result is wrong. This function accept number of any format
<?php
function format_price($number,$decPlaces,$decSep,$thouSep){
//$number - number for format
//$decPlaces - number of decimal places
//$decSep - separator for decimals
//$thouSep - separator for thousands
//first remove all white spaces
$number=preg_replace('/\s+/', '',$number);
//split string into array
$numberArr = str_split($number);
//reverse array and not preserve key, keys will help to find decimal place
$numberArrRev=array_reverse($numberArr);
//find first occurrence of non number character, that will be a decimal place
//store $key into variable $decPointIsHere
foreach ($numberArrRev as $key => $value) {
if(!is_numeric($value)){
if($decPointIsHere==""){
$decPointIsHere=$key;
}
}
}
//decimal comma or whatever it is replace with dot
//$decPointIsHere is the key of the element that will contain decimal separator dot
if($decPointIsHere!=""){
$numberArrRev[$decPointIsHere]=".";
}
//again check through array for non numerical characters but skipping allready processed keys
//if is not number remove from array
foreach ($numberArrRev as $key => $value) {
if(!is_numeric($value) && $key>$decPointIsHere){
unset($numberArrRev[$key]);
}
}
//reverse back, at the start reversed array $numberArrRev to $numberArr
$numberArr=array_reverse($numberArrRev);
//create string from array
$numberClean=implode("",$numberArr);
// apply php number_format function
return number_format($numberClean,$decPlaces,$decSep,$thouSep);
}
echo format_price("1 225 552, 55",2,',',' ')."<br>";
echo format_price("1.225.552, 55",2,',',' ')."<br>";
echo format_price("1'225'552. 55",2,',',' ')."<br>";
echo format_price("1225552.55",2,',',' ')."<br>";
?>
all results are: 1 225 552,55
nospam at nospam dot com ¶
13 years ago
Simple function to show money as only dollars if no cents, but will show 2 decimals if cents exist.
The 'cents' flag can force to never or always show 2 decimals
<?php
// formats money to a whole number or with 2 decimals; includes a dollar sign in front
function formatMoney($number, $cents = 1) { // cents: 0=never, 1=if needed, 2=always
if (is_numeric($number)) { // a number
if (!$number) { // zero
$money = ($cents == 2 ? '0.00' : '0'); // output zero
} else { // value
if (floor($number) == $number) { // whole number
$money = number_format($number, ($cents == 2 ? 2 : 0)); // format
} else { // cents
$money = number_format(round($number, 2), ($cents == 0 ? 0 : 2)); // format
} // integer or decimal
} // value
return '$'.$money;
} // numeric
} // formatMoney
$a = array(1, 1234, 1.5, 1.234, 2.345, 2.001, 2.100, '1.000', '1.2345', '12345', 0, '0.00');
// show cents if needed ($cents=1)
foreach ($a as $b) echo ('<br />'.$b.' = '.formatMoney($b, 1));
1 = $1
1234 = $1,234
1.5 = $1.50
1.234 = $1.23
2.345 = $2.35
2.001 = $2.00
2.1 = $2.10
1.000 = $1
1.2345 = $1.23
12345 = $12,345
0 = $0
0.00 = $0
// never show cents ($cents=0)
foreach ($a as $b) echo ('<br />'.$b.' = '.formatMoney($b, 0));
1 = $1
1234 = $1,234
1.5 = $2
1.234 = $1
2.345 = $2
2.001 = $2
2.1 = $2
1.000 = $1
1.2345 = $1
12345 = $12,345
0 = $0
0.00 = $0
// always show cents ($cents=2)
foreach ($a as $b) echo ('<br />'.$b.' = '.formatMoney($b, 2));
1 = $1.00
1234 = $1,234.00
1.5 = $1.50
1.234 = $1.23
2.345 = $2.35
2.001 = $2.00
2.1 = $2.10
1.000 = $1.00
1.2345 = $1.23
12345 = $12,345.00
0 = $0.00
0.00 = $0.00
?>
Cheers :)
And remember to always contribute custom functions if they might be useful to the rest of us or future versions of the php language.
liviu andrei (bls) ¶
10 years ago
To prevent the rounding that occurs when next digit after last significant decimal is 5 (mentioned by several people below):
<?php
function fnumber_format($number, $decimals='', $sep1='', $sep2='') {
if (($number * pow(10 , $decimals + 1) % 10 ) == 5) //if next not significant digit is 5
$number -= pow(10 , -($decimals+1));
return number_format($number, $decimals, $sep1, $sep2);
}
$t=7.15;
echo $t . " | " . number_format($t, 1, '.', ',') . " | " . fnumber_format($t, 1, '.', ',') . "\n\n";
//result is: 7.15 | 7.2 | 7.1
$t=7.3215;
echo $t . " | " . number_format($t, 3, '.', ',') . " | " . fnumber_format($t, 3, '.', ',') . "\n\n";
//result is: 7.3215 | 7.322 | 7.321
} ?>
have fun!
besciualexandru at gmail dot com ¶
6 years ago
// Here is a function that produces the same output as number_format() but also works with numbers bigger than 2^53.
function a_number_format($number_in_iso_format, $no_of_decimals=3, $decimals_separator='.', $thousands_separator='', $digits_grouping=3){
// Check input variables
if (!is_numeric($number_in_iso_format)){
error_log("Warning! Wrong parameter type supplied in my_number_format() function. Parameter \$number_in_iso_format is not a number.");
return false;
}
if (!is_numeric($no_of_decimals)){
error_log("Warning! Wrong parameter type supplied in my_number_format() function. Parameter \$no_of_decimals is not a number.");
return false;
}
if (!is_numeric($digits_grouping)){
error_log("Warning! Wrong parameter type supplied in my_number_format() function. Parameter \$digits_grouping is not a number.");
return false;
}
// Prepare variables
$no_of_decimals = $no_of_decimals * 1;
// Explode the string received after DOT sign (this is the ISO separator of decimals)
$aux = explode(".", $number_in_iso_format);
// Extract decimal and integer parts
$integer_part = $aux[0];
$decimal_part = isset($aux[1]) ? $aux[1] : '';
// Adjust decimal part (increase it, or minimize it)
if ($no_of_decimals > 0){
// Check actual size of decimal_part
// If its length is smaller than number of decimals, add trailing zeros, otherwise round it
if (strlen($decimal_part) < $no_of_decimals){
$decimal_part = str_pad($decimal_part, $no_of_decimals, "0");
} else {
$decimal_part = substr($decimal_part, 0, $no_of_decimals);
}
} else {
// Completely eliminate the decimals, if there $no_of_decimals is a negative number
$decimals_separator = '';
$decimal_part = '';
}
// Format the integer part (digits grouping)
if ($digits_grouping > 0){
$aux = strrev($integer_part);
$integer_part = '';
for ($i=strlen($aux)-1; $i >= 0 ; $i--){
if ( $i % $digits_grouping == 0 && $i != 0){
$integer_part .= "{$aux[$i]}{$thousands_separator}";
} else {
$integer_part .= $aux[$i];
}
}
}
$processed_number = "{$integer_part}{$decimals_separator}{$decimal_part}";
return $processed_number;
}
$original_number= 9223372036854775805;
echo a_number_format($original_number, 4, '.',"'",3);
// Outputs: 9'223'372'036'854'775'805.1230
isapoetra at gmail dot com ¶
14 years ago
here is the code to convert number to Indonesian text, this code has limitation as is number_format function. sorry for this.
/*
* Created : Iwan Sapoetra - Jun 13, 2008
* Project : Web
* Package : cgaf
*
*/
function terbilang( $num ,$dec=4){
$stext = array(
"Nol",
"Satu",
"Dua",
"Tiga",
"Empat",
"Lima",
"Enam",
"Tujuh",
"Delapan",
"Sembilan",
"Sepuluh",
"Sebelas"
);
$say = array(
"Ribu",
"Juta",
"Milyar",
"Triliun",
"Biliun", // remember limitation of float
"--apaan---" ///setelah biliun namanya apa?
);
$w = "";
if ($num <0 ) {
$w = "Minus ";
//make positive
$num *= -1;
}
$snum = number_format($num,$dec,",",".");
die($snum);
$strnum = explode(".",substr($snum,0,strrpos($snum,",")));
//parse decimalnya
$koma = substr($snum,strrpos($snum,",")+1);
$isone = substr($num,0,1) ==1;
if (count($strnum)==1) {
$num = $strnum[0];
switch (strlen($num)) {
case 1:
case 2:
if (!isset($stext[$strnum[0]])){
if($num<19){
$w .=$stext[substr($num,1)]." Belas";
}else{
$w .= $stext[substr($num,0,1)]." Puluh ".
(intval(substr($num,1))==0 ? "" : $stext[substr($num,1)]);
}
}else{
$w .= $stext[$strnum[0]];
}
break;
case 3:
$w .= ($isone ? "Seratus" : terbilang(substr($num,0,1)) .
" Ratus").
" ".(intval(substr($num,1))==0 ? "" : terbilang(substr($num,1)));
break;
case 4:
$w .= ($isone ? "Seribu" : terbilang(substr($num,0,1)) .
" Ribu").
" ".(intval(substr($num,1))==0 ? "" : terbilang(substr($num,1)));
break;
default:
break;
}
}else{
$text = $say[count($strnum)-2];
$w = ($isone && strlen($strnum[0])==1 && count($strnum) <=3? "Se".strtolower($text) : terbilang($strnum[0]).' '.$text);
array_shift($strnum);
$i =count($strnum)-2;
foreach ($strnum as $k=>$v) {
if (intval($v)) {
$w.= ' '.terbilang($v).' '.($i >=0 ? $say[$i] : "");
}
$i--;
}
}
$w = trim($w);
if ($dec = intval($koma)) {
$w .= " Koma ". terbilang($koma);
}
return trim($w);
}
//example
echo terbilang(999999999999)."\n";
/**
* result : Sembilan Ratus Sembilan Puluh Sembilan Milyar Sembilan Ratus Sembilan Puluh Sembilan Juta Sembilan Ratus Sembilan Puluh Sembilan Ribu Sembilan Ratus Sembilan Puluh Sembilan
*/
echo terbilang(9999999999999999);
/**
* todo : fix this bug pleasese
* problem : number_format(9999999999999999) <--- 10.000.000.000.000.000,0000
* Result : Sepuluh Biliun
*/
Theo Diem ¶
19 years ago
formatting numbers may be more easy if u use number_format function.
I also wrote this :
function something($number)
{
$locale = localeconv();
return number_format($number,
$locale['frac_digits'],
$locale['decimal_point'],
$locale['thousands_sep']);
}
hope this helps =)
[]'s
info at daniel-marschall dot de ¶
13 years ago
In my function my_number_format() [shown below] there was a bug.
If a negative number which is smaller than 1 was entered (-0,...), then the result was wrongly positive because +0 is equal to -0 (the content of $tmp[0] which was interpretet as numeric value).
Here is the corrected version:
<?php
function my_number_format($number, $dec_point, $thousands_sep)
{
$was_neg = $number < 0; // Because +0 == -0
$number = abs($number);
$tmp = explode('.', $number);
$out = number_format($tmp[0], 0, $dec_point, $thousands_sep);
if (isset($tmp[1])) $out .= $dec_point.$tmp[1];
if ($was_neg) $out = "-$out";
return $out;
}
?>
Thanks to Federico Cassinelli for the bug report.
[EDIT BY danbrown AT php DOT net: The original note follows.]
Let's say we got the number $inp = 1234.56
By using
<?php
return number_format($inp, 2, ',', '.');
?>
you can get the German format 1.234,56. (Comma as decimal separator and point as thousand separator)
But I have a problem with that: I want to add commas as thousand separators and change the decimal-separator (this could also be done with str_replace), but I do not want to change the amount of fractional digits!
But since the 2nd argument of number_format is necessary to enter the 3rd and 4th argument, this cannot be done with number_format. You have to change the fractional digits with this function.
But I want that 1234.56 changes into 1.234,56 and 1234.567890123456 changes into 1.234,567890123456
So, I created following function, that doesn't change the amount of fractional digits:
<?php
function my_number_format($number, $dec_point, $thousands_sep)
{
$tmp = explode('.', $number);
$out = number_format($tmp[0], 0, $dec_point, $thousands_sep);
if (isset($tmp[1])) $out .= $dec_point.$tmp[1];
return $out;
}
?>
Barbara ¶
13 years ago
I was looking for a SIMPLE way to format currency and account for negative values while not losing the calculation properties of my number. Here's my function - it's not rocket science, but maybe can help someone along the way.
<?php
function wims_currency($number) {
if ($number < 0) {
$print_number = "($ " . str_replace('-', '', number_format ($number, 2, ".", ",")) . ")";
} else {
$print_number = "$ " . number_format ($number, 2, ".", ",") ;
}
return $print_number;
}
?>
Sample use:
<?php
$pur_po_total = ($pur_po_total + $pur_item_total);
$print_pur_po_total = wims_currency($pur_po_total);
?>
Returns (for example) $ 44,561.00 or, if a negative ($ 407,250.00)
This way, I use my 1st variable for calculations and my 2nd variable for output. I'm sure there are better ways to do it, but this got me back on track.
info at ensostudio dot ru ¶
5 months ago
Note: use NumberFormatter to convert in human-readable format instead user function from comments:
<?php
echo NumberFormatter::create('en', NumberFormatter::SPELLOUT)->format(12309); // twelve thousand three hundred nine
echo NumberFormatter::create('ru', NumberFormatter::SPELLOUT)->format(12307.5); // двенадцать тысяч триста семь целых пять десятых
?>
zulisse at email dot it ¶
15 years ago
simpler function to convert a number in bytes, kilobytes....
<?php
function bytes($a) {
$unim = array("B","KB","MB","GB","TB","PB");
$c = 0;
while ($a>=1024) {
$c++;
$a = $a/1024;
}
return number_format($a,($c ? 2 : 0),",",".")." ".$unim[$c];
}
?>
you may also add others units over PeraBytes when the hard disks will reach 1024 PB :)
xmontero at dsitelecom dot com ¶
3 months ago
You can use:
number_format( $number, '.', ' ' )
Rationale:
Since 2003, the Internationa Standard of Units regulated that groups of three are to be separated by spaces and not dots or commas:
We can read about the S.I. in wikipedia about the numbers:
"Spaces should be used as a thousands separator (1000000) in contrast to commas or periods (1,000,000 or 1.000.000) to reduce confusion resulting from the variation between these forms in different countries."
here https://en.wikipedia.org/wiki/International_System_of_Units in the section "General Rules".
More specifically in an official document they introduce the concept of "thin space":
"for numbers with many digits the digits may be divided into groups of three by a thin space, in order to facilitate reading. Neither dots nor commas are inserted in the spaces between groups of three."
here https://mcyt.educa.madrid.org/laboratorios/Documentos/Otros/documentos/si_brochure_8_en.pdf in page 41, in the section "5.3.4 Formatting numbers, and the decimal marker".
Finally, also in wikipedia, we can read about the separation of digits:
"It is also used in the International System of Units and in many countries as a thousands separator when writing numbers in groups of three digits, in order to facilitate reading."
here: https://en.wikipedia.org/wiki/Thin_space
Note that "THIN SPACE" is breakable and for a non-breakable space we also have the "NARROW NO-BREAK SPACE". Nevertheless the definition is a bit different:
"Also starting from release 34 of Unicode Common Locale Data Repository (CLDR) the NNBSP is used in numbers as thousands group separator for French and Spanish locale."
We can read it here: https://en.wikipedia.org/wiki/Non-breaking_space at the end of the article
So, conclusion: We can use   for the regular one or   for the non-breaking one in the number_format function to accomodate modern times and forget once and for all to use dots or commas for the thousands.
More literature:
* Archive of the PDF https://web.archive.org/web/20140705194729/http://www.bipm.org/en/si/si_brochure/chapter5/5-3-2.html
* https://www.bipm.org/en/committees/cg/cgpm/22-2003/resolution-10
oelschlegel at gmail dot com ¶
5 months ago
Setting the second argument to a value to greater than what is possible in floating point representation returns some interesting results.
<?php
$a = 1234.5678;
print(number_format($a, 14, '.', ''));
// 1234.56780000000003
?>
info at ensostudio dot ru ¶
5 months ago
Auto calculate decimals by default:
<?php
function numberFormat(
float $num,
int $decimals = -1,
?string $decimalSeparator = '.',
?string $thousandsSeparator = ''
): string {
if ($decimals < 0) {
$intNum = (int) $num;
if ($num == $intNum) {
$decimals = 0;
} else {
$decimals = strlen($num) - strlen($intNum) - 1;
}
}
return number_format($num, $decimals, $decimalSeparator, $thousandsSeparator);
}
?>
markagius at markagius co uk ¶
2 years ago
If you want a number of digits after the point, but not unnecessary zeros.
Eg.
number_format(1.20000,4) = 1.2000
num_format(1.20000,4,0) = 1.2
number_format(1.20000,4) = 1.2000
num_format(1.20000,4,2) = 1.20
number_format(1.23456,4) = 1.2345
num_format(1.23456,4,2) = 1.2345
function num_format($numVal,$afterPoint=2,$minAfterPoint=0,$thousandSep=",",$decPoint="."){
// Same as number_format() but without unnecessary zeros.
$ret = number_format($numVal,$afterPoint,$decPoint,$thousandSep);
if($afterPoint!=$minAfterPoint){
while(($afterPoint>$minAfterPoint) && (substr($ret,-1) =="0") ){
// $minAfterPoint!=$minAfterPoint and number ends with a '0'
// Remove '0' from end of string and set $afterPoint=$afterPoint-1
$ret = substr($ret,0,-1);
$afterPoint = $afterPoint-1;
}
}
if(substr($ret,-1)==$decPoint) {$ret = substr($ret,0,-1);}
return $ret;
}
divinity76 at gmail dot com ¶
2 years ago
if you want to benchmark all costs for 5 seconds:
<?php
set_time_limit(5);
for($cost=4;;++$cost){
$start=microtime(true);
password_hash("test", PASSWORD_BCRYPT, ["cost" => $cost]);
$end=microtime(true);
echo "cost {$cost}: ".(int)(($end-$start)*1000)."ms - ".number_format($end-$start,4)."s\n";
}
?>
on my laptop rolling "Intel Core i7-8565U CPU @ 1.80GHz" it prints:
$ php foo.php
cost 4: 1ms - 0.0010s
cost 5: 2ms - 0.0022s
cost 6: 3ms - 0.0038s
cost 7: 6ms - 0.0069s
cost 8: 14ms - 0.0147s
cost 9: 25ms - 0.0254s
cost 10: 55ms - 0.0554s
cost 11: 103ms - 0.1040s
cost 12: 184ms - 0.1848s
cost 13: 367ms - 0.3676s
cost 14: 737ms - 0.7379s
cost 15: 1881ms - 1.8810s
(with ms meaning milliseconds and s meaning seconds)
mail at igor dot vodka ¶
3 years ago
Please be careful with stm555 at hotmail dot com's solution.
If you pass some little negative number (-1 < $number < 0) such as -0.01, the integer part would be converted to 0, so that the sign is eventually lost.
Here is a fixed version:
<?php
function number_format_unlimited_precision($number,$decimal = '.')
{
$broken_number = explode('.', abs($number));
$sign = $number < 0 ? '-' : '';
return $sign.number_format($broken_number[0]).$decimal.$broken_number[1];
}
?>
Svein Tjonndal (sveint at yahoo dot com) ¶
17 years ago
If you use space as a separator, it will break on that space in HTML tables...
Furthermore, number_format doesn't like ' ' as a fourth parameter. I wrote the following function to display the numbers in an HTML table.
function numberfix($number)
{
$number = number_format($number,0,","," ");
return str_replace(" ", " ", $number);
}
For use in:
<table><tr><td><?php echo $number; ?></td></tr></table>
mobi dot lenoe at gmail dot com ¶
8 years ago
I'd like to comment to the old notes of "stm555" and "woodynadobhar".
They wrote about "number_format_unlimited_precision()".
I guess many of us need that kind of function, which is the almost same function as number_format but don't round a number.
Does Anyone know any new solution in a recent PHP version?
...
If no, how about the following function? (I fixed somethings like bugs of the function in the old comment.)
<?php
function number_format_unchanged_precision($number, $dec_point='.', $thousands_sep=','){
if($dec_point==$thousands_sep){
trigger_error('2 parameters for ' . __METHOD__ . '() have the same value, that is "' . $dec_point . '" for $dec_point and $thousands_sep', E_USER_WARNING);
// It corresponds "PHP Warning: Wrong parameter count for number_format()", which occurs when you use $dec_point without $thousands_sep to number_format().
}
if(preg_match('{\.\d+}', $number, $matches)===1){
$decimals = strlen($matches[0]) - 1;
}else{
$decimals = 0;
}
return number_format($number, $decimals, $dec_point, $thousands_sep);
}
var_dump(number_format_unchanged_precision(1234.5678, ',', '.'));
var_dump(number_format_unchanged_precision(1234.5678, ','));
var_dump(number_format_unchanged_precision(12345678));
var_dump(number_format_unchanged_precision(-0.5678, ',', '.')); // It occurred a bug with the function in the old comment.
?>
output is:
string(10) "1.234,5678"
PHP Warning: 2 parameters for number_format_unchanged_precision() have the same value, that is "," for $dec_point and $thousands_sep in...
string(10) "1,234,5678"
string(10) "12,345,678"
string(7) "-0,5678"
Ali Okan YKSEL ¶
11 years ago
function formats numbers of datetime type,
<?php
$_GET["zaman"]="1983-8-28 5:5:5";
function _parseDatetimeToList($datetimeStr) { //datetime format: Y-m-d H-i-s
$datetimeArray=explode(" ", $datetimeStr);
$dateArray=explode("-",$datetimeArray[0]);
$year=str_pad($dateArray[0], 2, "0", STR_PAD_LEFT);
$month=str_pad($dateArray[1], 2, "0", STR_PAD_LEFT);
$day=str_pad($dateArray[2], 2, "0", STR_PAD_LEFT);
$timeArray=explode(":",$datetimeArray[1]);
$hour=str_pad($timeArray[0], 2, "0", STR_PAD_LEFT);
$minute=str_pad($timeArray[1], 2, "0", STR_PAD_LEFT);
$second=str_pad($timeArray[2], 2, "0", STR_PAD_LEFT);
return array($year, $month, $day, $hour, $minute, $second);
}
list($year, $month, $day, $hour, $minute, $second) = _parseDatetimeToList($_GET["zaman"]); // 1983-1-28 5:5:5
?>
dipu dot ashok dot 17 at gmail dot com ¶
12 years ago
function to convert numbers to words
indian: thousand,lakh,crore
Note: function can only convert nos upto 99 crores
<?php
$words = array('0'=> '' ,'1'=> 'one' ,'2'=> 'two' ,'3' => 'three','4' => 'four','5' => 'five','6' => 'six','7' => 'seven','8' => 'eight','9' => 'nine','10' => 'ten','11' => 'eleven','12' => 'twelve','13' => 'thirteen','14' => 'fouteen','15' => 'fifteen','16' => 'sixteen','17' => 'seventeen','18' => 'eighteen','19' => 'nineteen','20' => 'twenty','30' => 'thirty','40' => 'fourty','50' => 'fifty','60' => 'sixty','70' => 'seventy','80' => 'eighty','90' => 'ninty','100' => 'hundred &','1000' => 'thousand','100000' => 'lakh','10000000' => 'crore');
function no_to_words($no)
{ global $words;
if($no == 0)
return ' ';
else { $novalue='';$highno=$no;$remainno=0;$value=100;$value1=1000;
while($no>=100) {
if(($value <= $no) &&($no < $value1)) {
$novalue=$words["$value"];
$highno = (int)($no/$value);
$remainno = $no % $value;
break;
}
$value= $value1;
$value1 = $value * 100;
}
if(array_key_exists("$highno",$words))
return $words["$highno"]." ".$novalue." ".no_to_words($remainno);
else {
$unit=$highno%10;
$ten =(int)($highno/10)*10;
return $words["$ten"]." ".$words["$unit"]." ".$novalue." ".no_to_words($remainno);
}
}
}
echo no_to_words(999978987);
?>
IMSoP ¶
13 years ago
I'm not sure if this is the right place anyway, but "ben at last dot fm"'s ordinal function can be simplified further by removing the redundant "floor" (the result of floor is still a float, it's the "%" that's converting to int) and outer switch.
Note that this version also returns the number with the suffix on the end, not just the suffix.
<?php
function ordinal($num)
{
// Special case "teenth"
if ( ($num / 10) % 10 != 1 )
{
// Handle 1st, 2nd, 3rd
switch( $num % 10 )
{
case 1: return $num . 'st';
case 2: return $num . 'nd';
case 3: return $num . 'rd';
}
}
// Everything else is "nth"
return $num . 'th';
}
?>
samuelpeixoto at gmail dot com ¶
13 years ago
Exemplo: Example:
<?php
$number = 1234567.896;
echo '1: '.number_format($number, 2, ',', '').'<br>';
echo '2: '.number_format($number, 2, '.', '').'<br>';
echo '3: '.number_format($number, 2, ',', '.').'<br>';
echo '4: '.number_format($number, 2, '.', ',').'<br>';
echo '5: '.number_format($number, 2, ',', ' ').'<br>';
echo '6: '.number_format($number, 2, ',', "'").'<br>';
echo '7: '.number_format($number, 2, '', '').'<br>';
?>
Resultado: Result:
1: 1234567,90 -> Decimal separado por ,
2: 1234567.90 -> Decimal separado por .
3: 1.234.567,90 -> Moeda Brasil, Alemanha
4: 1,234,567.90 -> Inglês, USA
5: 1 234 567,90 -> França
6: 1'234'567,90 -> Suíça
7: 123456790 -> Sem decimal
gabrielu at gmail dot com ¶
14 years ago
Using the number_format I'm having some unexpected results. 30% of 14.95 (14.95 * .3) = 4.485. Now 4.485 rounded to two decimal places should give me 4.49.
Example:
<?php
echo number_format(14.95 * .3, 2, '.', '') . "\n";
echo number_format(4.485, 2, '.', '') . "\n";
?>
Unexpected Results:
4.48
4.49
uliciadrian01 at yahoo dot com ¶
14 years ago
A simple funtion to format american dollars.
<?php
function formatMoney($money) {
if($money<1) {
$money='¢'.$money*100;
}
else {
$dollars=intval($money);
$cents=$money-$dollars;
$cents=$cents*100;
$money='$'.$dollars.' and ¢'.$cents;
}
return $money;
}
echo formatmoney('52.342');
?>
This will output: " $52 and ¢34.2 ".
webmaster at WWW.ELLESSEWEB.NET ¶
15 years ago
This is a simple and useful function to convert a byte number in a KB or MB:
<?
function filesize_format ($bytes) {
$bytes=(float)$bytes;
if ($bytes<1024){
$numero=number_format($bytes, 0, ',', '.')." Byte";
return $numero;
}
if ($bytes<1048576){
$numero=number_format($bytes/1024, 2, ',', '.')." KByte";
return $numero;
}
if ($bytes>=1048576){
$numero=number_format($bytes/1048576, 2, ',', '.')." MByte";
return $numero;
}
}
?>
Jeroen de Bruijn [NL] ¶
16 years ago
If you want to display a number ending with ,- (like 200,-) when there are no decimal characters and display the decimals when there are decimal characters i use:
function DisplayDouble($value)
{
list($whole, $decimals) = split ('[.,]', $value, 2);
if (intval($decimals) > 0)
return number_format($value,2,".",",");
else
return number_format($value,0,".",",") .",-";
}
marc dot vanwoerkom at fernuni-hagen dot de ¶
16 years ago
See also the documentation for localeconv, which will provide values for decimal point and thousands separator from the C standard library.
Of course localeconv features many more locale information, like indicating to put the negative sign behind the value for some locale settings which can't be used to customize present number_format.
woodynadobhar at hotmail dot com ¶
17 years ago
What do you do if some of your numbers have decimal places, and some don't? You can switch between functions, but if you're building it in a loop, that's not a good solution. Instead, we have the same as below, with a slight change:
function number_format_unlimited_precision($number,$decimal = '.'){
$broken_number = explode($decimal,$number);
if($broken_number[1]==0){
return number_format($broken_number[0]);
}else{
return number_format($broken_number[0]).$decimal.$broken_number[1];
};
};
keyg at auralplanet dot com ¶
17 years ago
if you want as a separator and use windows charset this piece of code may help:
<?php
$number=number_format($number,2,'.',chr(0xA0));
?>
官方地址：https://www.php.net/manual/en/function.number-format.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
数据库
JAVA
面试
NoSQL
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
广告
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
PHP 8.1
adodb手册
ADORecordSet对象
opcache预加载
Composer的Packagist资源
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
PHP json解析（json_decode）页面工具
mysql面试题
纯php实现DES以及TripleDES加密算法
两千行PHP学习笔记
支持php7的性能采集扩展
[原创]诡异的php-fpm超时问题
php中几种注释规范
Packagist / Composer 中国全量镜像