As of August 2012, all browsers seem to show an all-or-nothing approach to buffering. In other words, while php is operating, no content can be shown.
In particular this means that the following workarounds listed further down here are ineffective:
1) ob_flush (), flush () in any combination with other output buffering functions;
2) changes to php.ini involving setting output_buffer and/or zlib.output_compression to 0 or Off;
3) setting Apache variables such as "no-gzip" either through apache_setenv () or through entries in .htaccess.
So, until browsers begin to show buffered content again, the tips listed here are moot.
PHP - Manual: ob_flush
2024-12-22
ob_flush
(PHP 4 >= 4.2.0, PHP 5, PHP 7, PHP 8)
ob_flush — 冲刷出（送出）输出缓冲区中的内容
说明
ob_flush(): void
这个函数将送出缓冲区的内容（如果里边有内容的话）。如果想进一步处理缓冲区中的内容，必须在ob_flush()之前调用ob_get_contents() ，因为在调用ob_flush()之后缓冲区内容将被丢弃。
此函数不会销毁输出缓冲区，而像ob_end_flush() 函数会销毁缓冲区。
返回值
没有返回值。
参见
- ob_get_contents() - 返回输出缓冲区的内容
- ob_clean() - 清空（擦掉）输出缓冲区
- ob_end_flush() - 冲刷出（送出）输出缓冲区内容并关闭缓冲
- ob_end_clean() - 清空（擦除）缓冲区并关闭输出缓冲
add a note
User Contributed Notes 14 notes
Lee ¶
9 years ago
dermeister dot online at gmail dot com ¶
9 years ago
some problems with ob_flush() and flush() could be resolved by defining content type header :
header( 'Content-type: text/html; charset=utf-8' );
so working code looks like this:
<?php
header( 'Content-type: text/html; charset=utf-8' );
echo 'Begin ...<br />';
for( $i = 0 ; $i < 10 ; $i++ )
{
echo $i . '<br />';
flush();
ob_flush();
sleep(1);
}
echo 'End ...<br />';
?>
chris - latko - org ¶
6 years ago
Although browsers now have an all or none buffering strategy, the arguments are not moot.
If you are not using ob_flush, you run this risk of exceeding socket timeouts (commonly seen in php-fpm/nginx combos).
Basically, flushing solves the infamous 504 Gateway Time-out error.
jake at qzdesign dot co dot uk ¶
3 years ago
If there is no active output buffer, an error of level E_NOTICE is generated (at least in PHP 7.1). To avoid this, test first with `ob_get_level()`.
Jens ¶
13 years ago
If you call ob_flush() and flush() and still dont get the buffer flushed it might be because some antivirus software (Panda in this case) holds the buffer until the page has finished loaded before sending it to the browser.
riimeik ¶
11 years ago
If you're still not getting the buffer work correctly then try to clean all the others before starting your own (and even if PHP tells you that there are no buffers active):
while(@ob_end_clean());
Anonymous ¶
16 years ago
I was having problems with output buffering which seemed to be active by default on the server, although phpinfo said something else..
In any case I needed to know that when I ran ob_start, it would start at the top level, so I could use ob_flush as it's intended without having to call multiple ob_flush in-script - this is what I did:
<?php
// make sure output buffering is off before we start it
// this will ensure same effect whether or not ob is enabled already
while (ob_get_level()) {
ob_end_flush();
}
// start output buffering
if (ob_get_length() === false) {
ob_start();
}
?>
Then I could call ob_flush(); followed by flush(); and get the output I wanted, which I didn't if I started the script with just ob_start();
This was on a windows apache 2 server with php 5.0.4 btw.
sebastian at jcompare dot com ¶
13 years ago
For some reason, calling just flush or ob_flush or even both together did not get my output buffers flushed, and calling ob_end_flush by itself didn't work either but calling them all worked well. Here is my new output flushing function.
<?php
function flush_buffers(){
ob_end_flush();
ob_flush();
flush();
ob_start();
}
?>
Enjoy
colnector at@ colnect punto com ¶
13 years ago
As stated in flush() manual entry, if php compresses the ouput with zlib this function may be ineffective.
A possible option for folders on your server that have scripts which may take a long time to run is to add the following in your relevant .htaccess file:
<FilesMatch "\.(php|html?)$">
php_flag zlib.output_compression off
php_value max_execution_time 3000
php_value max_input_time 3000
</FilesMatch>
cesoid at gmail dot com ¶
9 years ago
Currently I have Chrome on OS X Snow Leopard updating a page as it is sent more data, BUT it only does this after I send it <body> along with 1013 more characters (making 1019 total characters). After it receives this it immediately displays it and then displays anything else as it is received. (Note that this browser-operating system combination isn't necessarily the only one, it's just the only one I've tested.)
In order to do this using php, I've done nothing but send ob_flush() after each echo or print. I can also make it happen without ob_flush() by calling ob_implicit_flush(), then ob_end_flush() before print, and then it updates with each print after that. I have pretty typical settings and I change none of them when the file runs, it literally looks like this:
<?php
ob_implicit_flush();
ob_end_flush();
?><body>[1013 more characters]<?php
for ($i =
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
数据库
JAVA
面试
NoSQL
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
广告
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
adodb手册
ADORecordSet对象
opcache预加载
Composer的Packagist资源
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
mysql面试题
PHP json解析（json_decode）页面工具
[原创]诡异的php-fpm超时问题
php中几种注释规范
纯php实现DES以及TripleDES加密算法
php 修改图片大小
支持php7的性能采集扩展
利用PHP SOAP实现WEB SERVICE