PHP - Manual: ssh2_auth_pubkey_file

2024-12-22

ssh2_auth_pubkey_file

(PECL ssh2 >= 0.9.0)

ssh2_auth_pubkey_file — Authenticate using a public key

说明

ssh2_auth_pubkey_file(
    resource $session,
    string $username,
    string $pubkeyfile,
    string $privkeyfile,
    string $passphrase = ?
): bool

Authenticate using a public key read from a file.

参数

session

An SSH connection link identifier, obtained from a call to ssh2_connect().

username

pubkeyfile

The public key file needs to be in OpenSSH's format. It should look something like:

ssh-rsa AAAAB3NzaC1yc2EAAA....NX6sqSnHA8= rsa-key-20121110

privkeyfile

passphrase

If privkeyfile is encrypted (which it should be), the passphrase must be provided.

返回值

成功时返回 true，或者在失败时返回 false。

范例

示例 #1 Authentication using a public key


<?php
$connection = ssh2_connect('shell.example.com', 22, array('hostkey'=>'ssh-rsa'));

if (ssh2_auth_pubkey_file($connection, 'username',
                          '/home/username/.ssh/id_rsa.pub',
                          '/home/username/.ssh/id_rsa', 'secret')) {
  echo "Public Key Authentication Successful\n";
} else {
  die('Public Key Authentication Failed');
}
?>

注释

注意:
The underlying libssh library doesn't support partial auths very cleanly That is, if you need to supply both a public key and a password it will appear as if this function has failed. In this particular case a failure from this call may just mean that auth hasn't been completed yet. You would need to ignore this failure and continue on and call ssh2_auth_password() in order to complete authentication.

add a note

User Contributed Notes 11 notes

down

miloslav dot hula at gmail dot com ¶

2 years ago


If you have a problem with an RSA key, check that private key file contents starts with:

-----BEGIN RSA PRIVATE KEY-----

and not with:

-----BEGIN OPENSSH PRIVATE KEY-----

The first one can be created by:

ssh-keygen -m PEM -t rsa -f mykey

down

mrpetovan at gmail dot com ¶

6 years ago


Beware of the tilde (~) in the key file paths, as they will trigger the following warning (on a debug build):

PHP Warning:  String is not zero-terminated (ZZZZZZZZZZZZZZZZZZ1wjj*=?<) (source: Zend/zend_execute.h:81) in Unknown on line 0

although the authentication will suceed.

<?php 
    $ssh_conn = ssh2_connect('test.host.com', 22, array('hostkey' => 'ssh-rsa'));
    ssh2_auth_pubkey_file($ssh_conn, 'user', '~/.ssh/id_rsa.pub', '~/.ssh/id_rsa')
?>

The above code will throw the Warning.

<?php 
    $ssh_conn = ssh2_connect('test.host.com', 22, array('hostkey' => 'ssh-rsa'));
    ssh2_auth_pubkey_file($ssh_conn, 'user', '/home/user/.ssh/id_rsa.pub', '/home/user/.ssh/id_rsa')
?>

The above code won't.

If you want to perform a dynamic replacement of the tilde, you can use posix_getpwuid (http://php.net/manual/en/function.posix-getpwuid.php)

down

nerak-spelled-backwards at modo dot coop ¶

9 years ago


This function has a known bug (https://bugs.php.net/bug.php?id=58573) under some Linux installations: you can't encrypt your private key if you've compiled libssh2 using libgcrypt.  According to the bug page, the solution is to rebuild libssh2 with OpenSSL.  (Or don't encrypt your private key, but that seems irresponsible somehow.)

This isn't a bug report -- the bug is apparently already being fixed -- but a note for others, because it took me at least an hour of Googling to realize the problem wasn't with my own code.

down

christian at cvj dot se ¶

10 years ago


On my linux debian server running php communicating with another linux debian server I had problems getting rsa to work. dsa worked out of the box. I got it to work by doing the following in terminal

* ssh-keygen -t rsa
.... PUBFILE 
* ssh-keygen -f PUBFILE -e
OUTPUT

id_rsa.pub =
ssh-rsa OUTPUT [COMMENT]

down

Christophe ¶

1 year ago


Users should be aware of bug 78661 https://bugs.php.net/bug.php?id=78661 

As of december 2020, on some Linux distro, (debian 10 and ubuntu 20.04 at least), although the ssh daemon will accept the connection, the function ssh2_auth_pubkey_file stubbornly reports an error.

It took me hours to realise that my code was correct, but the function buggy. If you are hit by this bug, you may try https://www.php.net/ssh2_auth_password instead... If applicable.

down

max ¶

10 years ago


Well, you have to format the publickey with the following command:

# ssh-keygen -f id_rsa.pub -i
Output: "ssh-rsa <YOURKEYDATA>"

That worked fine for me.

down

Aurelien Marchand ¶

3 months ago


The vendor we deal with requires the use of both password authentication AND a public/private key authentication.

After much pain and testing, this is what we did to make it work, bypassing the need to install phpseclib:

<?php

$server = "subdomain.example.com";
$username = "username";
$password = "password";
$path_to_public_key = "file.pub";
$path_to_private_key = "file.priv"; // critical: permissions must be 0600!!
$path_to_needed_file = "/path/to/file/needed.txt";

$ssh2 = ssh2_connect($server);
@ssh2_auth_pubkey_file($ssh2,$username,$path_to_public_key,$path_to_private_key); // this returns a warning but it is normal and can be ignored
ssh2_auth_password($ssh2,$username,$password);
$sftp = ssh2_sftp($ssh2);
$file = fopen("ssh2.sftp://" . intval($sftp). $path_to_needed_file,"r");
$content = fread($file,1024);
fclose($file);
ssh2_disconnect($ssh2);

echo $content;
?>

down

-1

anjo2 ¶

11 years ago


rsa keys may don't work, using dsa keys are more compatible

Linux:
ssh-keygen -t dsa
cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys
chmod 700 ~/.ssh/
chmod -R 600 ~/.ssh/*

PHP:
<?php
    $methods = array(
    'kex' => 'diffie-hellman-group1-sha1',
    'hostkey' => 'ssh-dss',
    'client_to_server' => array(
    'crypt' => '3des-cbc',
    'mac' => 'hmac-md5',
    'comp' => 'none'),
    'server_to_client' => array(
    'crypt' => '3des-cbc',
    'mac' => 'hmac-md5',
    'comp' => 'none'));
    $connect = ssh2_connect('127.0.0.1', 22, $methods);
    if(ssh2_auth_pubkey_file($connect, 'username', '~/.ssh/id_dsa.pub', '~/.ssh/id_dsa'))
    {
        echo "Public Key Authentication Successful\n";
    }
    else
    {
        echo "Public Key Authentication Failed\n";
    }
?>

down

-2

deepakssn@gmailcom ¶

12 years ago


Setting up public key authentication:


1.  Login to the unix server you want to connect using putty.

2.  mkdir .ssh (there is a dot before ssh)

3.  cd .ssh

4.  ssh-keygen -t rsa mykey

5.  Enter passphrase as test

6.  ls -al -> you will find two files mykey , mykey.pub

7.  cat mykey.pub >>authorized_keys

8.  cat mykey

9.  Copy what you get on screen to notepad and save it as "c:\mykey" (within quotes)

10.  cat mykey.pub

11.  Copy what you get on screen to notepad and save it as "c:\mykey.pub" (within quotes)


<?php


function my_ssh_disconnect($reason, $message, $language) 

{

  printf("Server disconnected with reason code [%d] and message: %s\n", $reason, $message);

}


//Open a connection forcing 3des-cbc when sending packets, any strength aes cipher when receiving packets, no compression in either direction, and Group1 key exchange. 

$methods = array(

  'kex' => 'diffie-hellman-group1-sha1',

  'client_to_server' => array(

   'crypt' => 'aes256-cbc',

   'comp' => 'none',

   'mac' => 'hmac-sha1'),

  'server_to_client' => array(

   'crypt' => 'aes256-cbc',

   'comp' => 'none',

   'mac' => 'hmac-sha1'));


$callbacks = array('disconnect' => 'my_ssh_disconnect');


      // Function to run a command on the unix server


      function run_cmd($ssh_host, $user_name, $keyfilename, $ssh_command)

      {

          $connection = ssh2_connect($ssh_host, 22, $methods, $callbacks);

          if (!$connection) die('Connection failed');

          if (ssh2_auth_pubkey_file($connection, $user_name, $keyfilename.".pub", $keyfilename, 'test'))

          {

            echo "Public Key Authentication Successful as user: $user_name";

          }

          else

          {

            die('Public Key Authentication Failed');

          }


          $stream = ssh2_exec($connection, $ssh_command);

          $i=0;

          stream_set_blocking($stream, true);

          $line = stream_get_line($stream, 1024, "\n");

          while (!feof($stream))                                                                               

          {

                  echo $line.' ';

                  $line = stream_get_line($stream, 1024, "\n");

                  $i++;

          }  

          echo "Count : ".$i;

          flush();

          unset($stream);  

      }


      function my_ssh_disconnect($reason, $message, $language)

      {

            printf("Server disconnected with reason code [%d] and message: %s\n",

            $reason, $message);

      }


      // Main Code


      $user_name = "USERID";

      $keydir = "c:\\";

      $search_string = 'needle';

      $keyfilename= $keydir.'mykey';

      $ssh_host = "foo.bar.com";

      $ssh_command = 'grep "'.$search_string.'" /haystack/*.log';

      run_cmd($ssh_host, $user_name, $keyfilename, $ssh_command);


      $ssh_command = 'ls -al';

      run_cmd($ssh_host, $user_name, $keyfilename, $ssh_command);

?>

down

-3

gramo dot gnu at gmail dot com ¶

12 years ago


I had an anoyiing problem with this function, everytime I tried to make it run it responds with an 


Authentication failed for <user> using public key


but when I try directly to connect to the server using

ssh <user>@<domain>

Things works fine...


After lots of intents I realize that local files were read protected from user apache (they were stored at /home/<user>/.ssh directory)


So, if you also have this problem, just make a new directory into a place where apache can read and place there the keys.


The whole thing I do is as follows (Linux & Apache both server and client):


First I create a directory where apache can read


mkdir ~/.newssh_keys

chmod 777 ~/.newssh_keys


(This is a security issue, so maybe you need to realize how to make it safer.)


Then I create keys into local server choosing ~/.newssh_keys/id_dsa as the file to save the key:


ssh-keygen -t dsa

...

Enter file in which to save the key (/home/<user>/.ssh/id_dsa): ~/.newssh_keys/id_dsa

...


Then I have to change permissions to private key

(This is a security issue, so maybe you need to realize how to make it safer.)


chmod 644 ~/.newssh_keys/id_dsa


I copy the public key into the server's .ssh directory

client$ scp id_dsa.pub <remoteuser>@<server_domain>:~/.ssh/


and then I connect myself to the server using traditional ssh in order to append the public key at the end of authorized_keys2 file


server$ cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys2


and remove the public key in order to be clean

server$ rm ~/.ssh/id_dsa.pub


Finally I use this code into my php script


<?php

// This in order to be sure apache can read public key

// (remove this after debug)

$pub_key = file_get_contents('~/.newssh_keys/id_dsa.pub');

print "<pre>";

var_export($pub_key);

print "</pre>";


// This in order to check private one

// (remove this after debug)

$prv_key = file_get_contents('~/.newssh_keys/id_dsa');

print "<pre>";

var_export($prv_key);

print "</pre>";


// Finally the connection code

$connection = ssh2_connect('<server_domain>', 22, array('hostkey', 'ssh-dss'));

if (ssh2_auth_pubkey_file($connection, '<server_user>',

                          '~/.newssh_keys/id_dsa.pub',

                          '~/.newssh_keys/id_dsa')) {

  echo "Public Key Authentication Successful\n";

} else {

  echo "Public Key Authentication Failed";

}

?>

down

-5

tekiedude at gmail dot com ¶

14 years ago


This is probably incredibly insecure but if you are in a closed environment, you can run it at your own risk. 

I was trying to get ssh access from server A to server B but server A was running apache as 'apache' and 
I needed files on server B that were owned by root. So I needed some way for the apache user to connect 
to server B as root.  Here's what I did (both servers running linux - specifically CentOS4):

1. ssh-keygen -t rsa -f id_rsa  generate with no passphrase
2. append the id_rsa.pub file to server B /root/.ssh/authorized_keys2
3. copy the id_rsa and id_rsa.pub files to a directory like /var/www/.ssh/ 
(happens to be apache's home dir on CentOS)
4. chown -R apache.apache /var/www/.ssh

Then you can connect like this:
$connection = ssh2_connect($server,22,array('hostkey'=>'ssh-rsa'));
if (ssh2_auth_pubkey_file($connection,'root',
'/var/www/.ssh/id_rsa.pub',
'/var/www/.ssh/id_rsa')) {
echo "success!";
}
else
{
echo "no success :-(";
}

add a note

官方地址：https://www.php.net/manual/en/function.ssh2-auth-pubkey-file.php

有任何技术问题请点击这里网站运营推广招聘

IT PHP 编程语言 Linux 开发编程科技 Elasticsearch HTML/CSS/XML 网络数据库 JAVA 面试 NoSQL C/C++ Golang Git 算法操作系统正则表达式 Redis 互联网 MySql JavaScript 运维软件国际架构设计 Mac OS TCP/IP Excel Vim Windows Socket Oracle VR MongoDB Python 运营 MemCache 商业硬件电子娱乐设计 nginx 摄影游戏 WordPress HTTP 团建数码电器

php7 安装fileinfo扩展 preg_split — 通过一个正则表达式分隔字符串 php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题 [PHP] inet_pton/inet_ntop IP地址转换函数 PHP 8.1 [鸟哥]PHP_INT_MIN 和 -9223372036854775808 ADORecordSet对象 adodb手册 opcache预加载 Composer的Packagist资源 array_multisort() 多字段排序 PHPMailer设置utf8 PHPMailer字符集CharSet PHP json解析（json_decode）页面工具 mysql面试题 [原创]诡异的php-fpm超时问题 php中几种注释规范纯php实现DES以及TripleDES加密算法 php 修改图片大小支持php7的性能采集扩展 PHP mkdir()写出来的权限与mode值不符合

略微加速

PHP官方手册 - 互联网笔记

ssh2_auth_pubkey_file

说明

参数

返回值

范例

注释

User Contributed Notes 11 notes