It is unlikely this example works quite as advertised.
The foreground job will block, however the background job should not.. (and if it does that's not documented Gearman behaviour far as I know and would not make sense for a Background job).
So, if the foreground job completes, then we would expect runTasks() to return at that moment, regardless of the status of the background job(s). With nothing else to do, the php script (the client) in this example would exit at that point.
To fully-utilize background jobs, it's reasonable to assume that we still wish to know their status. To do that, you need a polling loop that "checks up on them" and waits until their completion.
That eliminates the point of background jobs of course - because the client would still be Blocking (in a polling loop) more or less occupied, and unable to exit/finish.
So, in practice, background jobs mean you are decoupled from the client upon execution (because the main point is to free up the client, otherwise just use foreground execution), which means the client is likely going to exit, meaning the jobs themselves should be reporting their status and final result independently, not leaving it up to the client.
It's a significantly different setup compared to foreground jobs. In fact this example is kind of silly to even mix the two.
Nobody will ever see this post, because apparently nobody in the world has ever commented on the php gearman client, but it's a good post never the less.
PHP - Manual: GearmanClient::addTaskBackground
2024-11-15
GearmanClient::addTaskBackground
(PECL gearman >= 0.5.0)
GearmanClient::addTaskBackground — Add a background task to be run in parallel
说明
public GearmanClient::addTaskBackground(
string
string
mixed
string
): GearmanTask
string
$function_name,string
$workload,mixed
&$context = ?,string
$unique = ?): GearmanTask
Adds a background task to be run in parallel with other tasks. Call this method for all the tasks to be run in parallel, then call GearmanClient::runTasks() to perform the work.
参数
-
function_name -
由程序自动执行的已注册函数。
-
workload -
被处理的序列化数据。
-
context -
与任务关联的应用程序上下文。
-
unique -
用于标识特定任务的唯一性 ID。
返回值
A GearmanTask object or false if the task could not be added.
范例
示例 #1 Two tasks, one background and one not
This example illustrates the difference between running a background task and a normal task. The client adds two tasks to execute the same function, but one is added with addTaskBackground(). A callback is set so that progress of the job can be tracked. A simple worker with an artificial delay reports on the job progress and the client picks this up through the callback. Two workers are run for this example. Note that the background task does not show in the client output.
<?php
# The client script
# create our gearman client
$gmc= new GearmanClient();
# add the default job server
$gmc->addServer();
# set a couple of callbacks so we can track progress
$gmc->setCompleteCallback("reverse_complete");
$gmc->setStatusCallback("reverse_status");
# add a task for the "reverse" function
$task= $gmc->addTask("reverse", "Hello World!", null, "1");
# add another task, but this one to run in the background
$task= $gmc->addTaskBackground("reverse", "!dlroW olleH", null, "2");
if (! $gmc->runTasks())
{
echo "ERROR " . $gmc->error() . "\n";
exit;
}
echo "DONE\n";
function reverse_status($task)
{
echo "STATUS: " . $task->unique() . ", " . $task->jobHandle() . " - " . $task->taskNumerator() .
"/" . $task->taskDenominator() . "\n";
}
function reverse_complete($task)
{
echo "COMPLETE: " . $task->unique() . ", " . $task->data() . "\n";
}
?>
<?php
# The worker script
echo "Starting\n";
# Create our worker object.
$gmworker= new GearmanWorker();
# Add default server (localhost).
$gmworker->addServer();
# Register function "reverse" with the server.
$gmworker->addFunction("reverse", "reverse_fn");
print "Waiting for job...\n";
while($gmworker->work())
{
if ($gmworker->returnCode() != GEARMAN_SUCCESS)
{
echo "return_code: " . $gmworker->returnCode() . "\n";
break;
}
}
function reverse_fn($job)
{
echo "Received job: " . $job->handle() . "\n";
$workload = $job->workload();
$workload_size = $job->workloadSize();
echo "Workload: $workload ($workload_size)\n";
# This status loop is not needed, just showing how it works
for ($x= 0; $x < $workload_size; $x++)
{
echo "Sending status: " . ($x + 1) . "/$workload_size complete\n";
$job->sendStatus($x+1, $workload_size);
$job->sendData(substr($workload, $x, 1));
sleep(1);
}
$result= strrev($workload);
echo "Result: $result\n";
# Return what we want to send back to the client.
return $result;
}
?>
Worker output for two workers running:
Received job: H:foo.local:65 Workload: !dlroW olleH (12) 1/12 complete Received job: H:foo.local:66 Workload: Hello World! (12) Sending status: 1/12 complete Sending status: 2/12 complete Sending status: 2/12 complete Sending status: 3/12 complete Sending status: 3/12 complete Sending status: 4/12 complete Sending status: 4/12 complete Sending status: 5/12 complete Sending status: 5/12 complete Sending status: 6/12 complete Sending status: 6/12 complete Sending status: 7/12 complete Sending status: 7/12 complete Sending status: 8/12 complete Sending status: 8/12 complete Sending status: 9/12 complete Sending status: 9/12 complete Sending status: 10/12 complete Sending status: 10/12 complete Sending status: 11/12 complete Sending status: 11/12 complete Sending status: 12/12 complete Sending status: 12/12 complete Result: !dlroW olleH Result: Hello World!
Client output:
STATUS: 1, H:foo.local:66 - 1/12 STATUS: 1, H:foo.local:66 - 2/12 STATUS: 1, H:foo.local:66 - 3/12 STATUS: 1, H:foo.local:66 - 4/12 STATUS: 1, H:foo.local:66 - 5/12 STATUS: 1, H:foo.local:66 - 6/12 STATUS: 1, H:foo.local:66 - 7/12 STATUS: 1, H:foo.local:66 - 8/12 STATUS: 1, H:foo.local:66 - 9/12 STATUS: 1, H:foo.local:66 - 10/12 STATUS: 1, H:foo.local:66 - 11/12 STATUS: 1, H:foo.local:66 - 12/12 COMPLETE: 1, !dlroW olleH DONE
参见
- GearmanClient::addTask() - Add a task to be run in parallel
- GearmanClient::addTaskHigh() - Add a high priority task to run in parallel
- GearmanClient::addTaskLow() - Add a low priority task to run in parallel
- GearmanClient::addTaskHighBackground() - Add a high priority background task to be run in parallel
- GearmanClient::addTaskLowBackground() - Add a low priority background task to be run in parallel
- GearmanClient::runTasks() - Run a list of tasks in parallel
add a note
User Contributed Notes 3 notes
Anonymous ¶
6 years ago
iunknowvb at gmail dot com ¶
4 years ago
function run_process($cmd,$outputFile = '/dev/null', $append = false){
$pid=0;
if (strtoupper(substr(PHP_OS, 0, 3)) === 'WIN') {//'This is a server using Windows!';
$cmd = 'wmic process call create "'.$cmd.'" | find "ProcessId"';
$handle = popen("start /B ". $cmd, "r");
$read = fread($handle, 200); //Read the output
$pid=substr($read,strpos($read,'=')+1);
$pid=substr($pid,0,strpos($pid,';') );
$pid = (int)$pid;
pclose($handle); //Close
}else{
$pid = (int)shell_exec(sprintf('%s %s %s 2>&1 & echo $!', $cmd, ($append) ? '>>' : '>', $outputFile));
}
return $pid;
}
function is_process_running($pid){
if (strtoupper(substr(PHP_OS, 0, 3)) === 'WIN') {//'This is a server using Windows!';
//tasklist /FI "PID eq 6480"
$result = shell_exec('tasklist /FI "PID eq '.$pid.'"' );
if (count(preg_split("/\n/", $result)) > 0 && !preg_match('/No tasks/', $result)) {
return true;
}
}else{
$result = shell_exec(sprintf('ps %d 2>&1', $pid));
if (count(preg_split("/\n/", $result)) > 2 && !preg_match('/ERROR: Process ID out of range/', $result)) {
return true;
}
}
return false;
}
function stop_process($pid){
if (strtoupper(substr(PHP_OS, 0, 3)) === 'WIN') {//'This is a server using Windows!';
$result = shell_exec('taskkill /PID '.$pid );
if (count(preg_split("/\n/", $result)) > 0 && !preg_match('/No tasks/', $result)) {
return true;
}
}else{
$result = shell_exec(sprintf('kill %d 2>&1', $pid));
if (!preg_match('/No such process/', $result)) {
return true;
}
}
}
$cmd='';
if (strtoupper(substr(PHP_OS, 0, 3)) === 'WIN') {//'This is a server using Windows!';
$cmd= $php_path.'\php.exe '.$path.'\long_process.php' ;
}else{
$cmd='/usr/bin/php -f /var/www/example.com/public/long_process.php';
}
$pid=run_process($cmd);
raitech at gmail dot com ¶
6 years ago
This method seems only useful when you doesn't need to know something about the worker, when you can let runTasks() finishes its code and destroy the GearmanClient object without a problem.
If you need to get data from worker via callbacks, forget it after runTasks() finishes.
You have to block your execution in the GearmanClient "main loop", so it can call the callbacks. It seems that runTasks() is that "main loop".
官方地址：https://www.php.net/manual/en/gearmanclient.addtaskbackground.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
Packagist / Composer 中国全量镜像
PHP获取指定函数定义在哪个文件中及行号
PHP mkdir()写出来的权限与mode值不符合
adodb连接mysql多个数据库的问题
php设置cookie为httponly防止xss攻击