Just to be clear, autocommit not only turns on/off transactions, but will also 'commit' any waiting queries.
<?php
mysqli_autocommit($link, FALSE); // turn OFF auto
-some query 1;
-some query 2;
mysqli_commit($link); // process ALL queries so far
-some query 3;
-some query 4;
mysqli_autocommit($link, TRUE); // turn ON auto
?>
All 4 will be processed.
PHP - Manual: mysqli::autocommit
2024-11-14
mysqli::autocommit
mysqli_autocommit
(PHP 5, PHP 7, PHP 8)
mysqli::autocommit -- mysqli_autocommit — 打开或关闭本次数据库连接的自动命令提交事务模式
说明
面向对象风格
mysqli::autocommit(bool
$mode): bool过程化风格
打开或关闭本次数据库连接的自动命令提交事务模式。
如需要确认当前连接的自动事务提交状态，可执行这个SQL请求SELECT @@autocommit.
参数
-
mysql -
仅以过程化样式：由mysqli_connect() 或 mysqli_init() 返回的 mysqli 对象。
-
mode -
Whether to turn on auto-commit or not.
返回值
成功时返回 true， 或者在失败时返回 false。
注释
注意:
这个方法不会在不支持事务处理的表单查询中生效，如MyISAM或 ISAM。
范例
示例 #1 mysqli::autocommit() example
面向对象风格
<?php
$mysqli = new mysqli("localhost", "my_user", "my_password", "world");
if (mysqli_connect_errno()) {
printf("Connect failed: %s\n", mysqli_connect_error());
exit();
}
/* turn autocommit on */
$mysqli->autocommit(TRUE);
if ($result = $mysqli->query("SELECT @@autocommit")) {
$row = $result->fetch_row();
printf("Autocommit is %s\n", $row[0]);
$result->free();
}
/* close connection */
$mysqli->close();
?>
过程化风格
<?php
$link = mysqli_connect("localhost", "my_user", "my_password", "world");
if (!$link) {
printf("Can't connect to localhost. Error: %s\n", mysqli_connect_error());
exit();
}
/* turn autocommit on */
mysqli_autocommit($link, TRUE);
if ($result = mysqli_query($link, "SELECT @@autocommit")) {
$row = mysqli_fetch_row($result);
printf("Autocommit is %s\n", $row[0]);
mysqli_free_result($result);
}
/* close connection */
mysqli_close($link);
?>
以上例程会输出：
Autocommit is 1
add a note
User Contributed Notes 4 notes
jcwebb at dicoe dot com ¶
14 years ago
Geoffrey Thubron ¶
15 years ago
It's worth noting that you can perform transactions without disabling autocommit just using standard sql. "START TRANSACTION;" will start a transaction. "COMMIT;" will commit the results and "ROLLBACK;" will revert to the pre-transaction state.
CREATE TABLE and CREATE DATABASE (and probably others) are always commited immediately and your transaction appears to terminate. Thus any commands before and after will be commited, even if a subsequent rollback is attempted.
If you are in the middle of a transaction and you call mysqli_close() it appears that you get the funcitonality of an implicit rollback.
I can't reproduce the "code bug causes lock" problem outlined below (I always get a successful rollback and the script will run umtine times successfully). Therefore, I would suggest that the problem is fixed in php-5.2.2.
Glen ¶
15 years ago
I've found that if PHP exits due to a code bug during a transaction, an InnoDB table can remain locked until Apache is restarted.
The simple test is to start a transaction by setting $mysqli_obj->autocommit(false) and executing an insert statement. Before getting to a $mysqli_obj->commit statement - have a runtime code bug bomb PHP. You check the database, no insert happened (you assume a rollback occurred) .. and you go fix the bug, and try again... but this time the script takes about 50 seconds to timeout - the insert statement returning with a “1205 - Lock wait timeout exceeded; try restarting transaction”. No rollback occurred. And this error will not go away until you restart Apache - for whatever reason, the resources are not released until the process is killed.
I found that an ‘exit’, instead of a PHP code bug, will not cause a problem. So there is an auto-rollback mechanism in place - it just fails miserably when PHP dies unexpectantly. Having to restarting apache is a pretty drastic measure to overcome a code bug.
To avoid this problem, I use “register_shutdown_function()” when I start a transaction, and set a flag to indicate a transaction is in process (because there is no unregister_shutdown_function()). See below. So the __shutdown_check() routine (I beleive it needs to be public) is called when the script bombs - which is able to invoke the rollback().
these are just the relevant bits to give u an idea...
<?php
public function begin_transaction() {
$ret = $this->mysqli_obj->autocommit(false);
$this->transaction_in_progress = true;
register_shutdown_function(array($this, "__shutdown_check"));
}
public function __shutdown_check() {
if ($this->transaction_in_progress) {
$this->rollback();
}
}
public function commit() {
$ret = $this->mysqli_obj->commit();
$this->transaction_in_progress = false;
}
public function rollback() {
$ret = $this->mysqli_obj->rollback();
$this->transaction_in_progress = false;
}
?>
True for PHP 5.1.6 + MySQL 5.0.24a.
will at phpfever dot com ¶
16 years ago
If you are using the mysql command line tool, here are some helpful hints for the autocommit feature:
1. To view the current autocommit setting, you can use this query: select @@autocommit; It will return the current setting as 1 or 0 (on or off)
2. You can manage the default autocommit feature in you my.cnf or my.ini by adding the following line: init_connect='set autocommit=0'. I'm pretty sure this isn't in the documentation, but it does work.
Here are the current engines, as of MySQL 5.1dev that support transactions:
InnoDB
BerkeleyDB
Falcon
Falcon is very new, so beware using it on production systems.
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
PHP mkdir()写出来的权限与mode值不符合
Packagist / Composer 中国全量镜像
支持php7的性能采集扩展
adodb连接mysql多个数据库的问题
php $_SERVER中的SERVER_NAME 和HTTP_HOST的区别