For Wampp (Windows)
-----------------------------------------------------------------------------------
1. Find out what is your 'PHP Extension Build' version by using phpinfo(). You can use this - http://localhost/?phpinfo=1
2. Download the pthreads that matches your php version (32 bit or 64 bit) and php extension build (currently used VC11). Use this link for download - http://windows.php.net/downloads/pecl/releases/pthreads/
3. Extract the zip -
Move php_pthreads.dll to the 'bin\php\ext\' directory.
Move pthreadVC2.dll to the 'bin\php\' directory.
Move pthreadVC2.dll to the 'bin\apache\bin' directory.
Move pthreadVC2.dll to the 'C:\windows\system32' directory.
4. Open php\php.ini and add
extension=php_pthreads.dll
Now restart server and you are done. Thanks.
PHP - Manual: 安装
2024-12-22
安装
pthreads 扩展由 PECL 主持，使用 » github 管理源代码。 使用标准的 PECL 包安装方式就可以完成安装：» https://pecl.php.net/package/pthreads。
Windows 用户可以从 » PECL 下载已经构建的二进制发行包。
警告
Windows 用户需要将 pthreadVC2.dll （包含在 Windows 版二进制发行包中）所在路径加入到 PATH 环境变量中。
add a note
User Contributed Notes 13 notes
zahid dot smz at gmail dot com ¶
8 years ago
Michel Phillipe Luca ¶
7 years ago
Here is how I got it working under Linux Ubuntu distro - WITHOUT USE PECL:
We will download both, PHP and Pthread without PECL
1 - Get PHP version
For this example we will use version: 5.4.36
# wget http://www.php.net/distributions/php-5.4.36.tar.gz
2- Get Pthreads version:
I'm using an old version but, you could take any one
# wget http://pecl.php.net/get/pthreads-1.0.0.tgz
Extract both, php and pthreads versions
#tar zxvf php-5.4.36.tar.gz
#tar zxvf pthreads-1.0.0.tgz
3- Move Pthreads to php/ext folder. Inside version of PHP downloaded at item 1.
4- Reconfigure sources
# ./buildconf --force
# ./configure --help | grep pthreads
You have to see --enable-pthreads listed. If do not, clear the buidls with this commands:
# rm -rf aclocal.m4
# rm -rf autom4te.cache/
# ./buildconf --force
5 - Inside php folder run configure command to set what we need:
# ./configure --enable-debug --enable-maintainer-zts --enable-pthreads --prefix=/usr --with-config-file-path=/etc
6 - Install PHP
We will run make clear just to be sure that no other crashed build will mess our new one.
# make clear
# make
# make install
7 - Copy configuration file of PHP and add local lib to include path
# cp php.ini-development /etc/php.ini
Edit php.ini and set Include_path to be like this:
Include_path = “/usr/local/lib/php”
9 - Check Modules
# php -m (check pthread loaded)
You have to see pthreads listed
10 - If pthread is not listed, update php.ini
# echo "extension=pthreads.so" >> /etc/php.ini
Jimmy Christensen ¶
9 years ago
On Windows the installation is as follows:
Download the pthreads that matches your php version.
I found mine at: http://windows.php.net/downloads/pecl/releases/pthreads/
(I used version 0.44 wich is the newest at the time of writing this, and then downloaded the one for php 5.3 which is the version I am using).
Extract the zip.
Move php_pthreads.dll to the php\ext\ directory.
Move pthreadVC2.dll to the php\ directory.
Open php\php.ini and add
extension=php_pthreads.dll
You are done.
Pedro Proenca ¶
8 years ago
I haven't found any proper instructions on how to install pthreads in linux, so I'll leave the steps I followed:
# Required libraries
sudo apt-get install gcc make libzzip-dev libreadline-dev libxml2-dev \
libssl-dev libmcrypt-dev libcurl4-openssl-dev lib32bz2-dev
# Download PHP
cd /usr/local/src
wget http://www.php.net/distributions/php-<version>.tar.gz
( e.g. wget http://www.php.net/distributions/php-5.5.8.tar.gz )
# Extract
tar zxvf php-<version>.tar.gz
(e.g. tar zxvf php-5.5.8.tar.gz )
# Configure
cd /usr/local/src/php-<version>
( e.g. cd /usr/local/src/php-5.5.8 )
./configure --prefix=/usr --with-config-file-path=/etc --enable-maintainer-zts
# Compile
make && make install
( make -j3 && make -j3 install) -> Faster building
# Copy configuration
cp php.ini-development /etc/php.ini
# Install pthreads
pecl install pthreads
echo "extension=pthreads.so" >> /etc/php.ini
# Check installation
php -m | grep pthreads
bens at effortlessis dot com ¶
1 year ago
Sadly, this extension seems to be in poor repair. After spending a few hours trying to get it to fly on Fedora 32 with PHP 7.4, I noticed that it's not really maintained since about 2016.
Attempting to compile it with PHP 7.4 results in screens full of nasty compile errors.
pedro dot proenca at shapedfor dot me ¶
8 years ago
I haven't found any proper instructions on how to install pthreads in linux, so I'll leave the steps I followed:
# Required libraries
sudo apt-get install gcc make libzzip-dev libreadline-dev libxml2-dev \
libssl-dev libmcrypt-dev libcurl4-openssl-dev lib32bz2-dev
# Download PHP
cd /usr/local/src
wget http://www.php.net/distributions/php-<version>.tar.gz
( e.g. wget http://www.php.net/distributions/php-5.5.8.tar.gz )
# Extract
tar zxvf php-<version>.tar.gz
(e.g. tar zxvf php-5.5.8.tar.gz )
# Configure
cd /usr/local/src/php-<version>
( e.g. cd /usr/local/src/php-5.5.8 )
./configure --prefix=/usr --with-config-file-path=/etc --enable-maintainer-zts
# Compile
make && make install
( make -j3 && make -j3 install) -> Faster building
# Copy configuration
cp php.ini-development /etc/php.ini
# Install pthreads
pecl install pthreads
echo "extension=pthreads.so" >> /etc/php.ini
# Check installation
php -m | grep pthreads
matias dot zumbo at gmail dot com ¶
8 years ago
HOW TO INSTALL IN LINUX SYSTEM'S:
------------------------------------
1) Download PHP sources and Unpack PHP
2) Download PEAR
wget http://pear.php.net/go-pear.phar
php go-pear.phar
3) Download pthreads
Get PECL extension (PECL is a repository for PHP Extensions)
# pecl install pthread-0.4.4
4) Unpack pthreads
copy pthread-0.4.4 to php/ext
(for ./configure allow add option --enable-pthreads)
# mv build/php-src-master/ext/pthreads-master build/php-src-master/ext/pthreads
5) Reconfigure sources
# ./buildconf --force
# ./configure --help | grep pthreads
You should see the appropriate --enable-pthreads option listed as a result, if you do not, then
# rm -rf aclocal.m4
# rm -rf autom4te.cache/
# ./buildconf --force
6) Build PHP
Compile PHP source code
Add:
# ./configure --enable-debug --enable-maintainer-zts --enable-pthreads
7) Installing PHP
# make
# sudo make install
8) Update php.ini
Add in php.ini
extension=pthreads.so
Include_path = “/usr/local/lib/php”
9) Check Modules
php -m (check pthread loaded)
10) Test Thread Class
# php SimpleTest.php
horica78 at yahoo dot com ¶
3 years ago
They can still be used in web server if used with exec('php script.php') and php-cli.ini .
agnelvishal at gmail dot com ¶
3 years ago
To compile PHP 7.2 with pthreads on Ubuntu 16.04 or Ubuntu 18.04 or Debian 9 Stretch, use this bash file at https://gist.github.com/agnelvishal/24f42c65af2f6cace1e9387617a0182a
jason at jason-rush dot com ¶
8 years ago
The files are in the format:
php_pthreads-X.XX-Y.Y-ts-vcZZ-x86.zip
where
X.XX is the version of the phpthreads-win32
Y.Y is the base version of PHP that you are running
ZZ is ?? (version of compiler?)
Currently, 0.44 is the latest release of phpthreads-win32, so X.XX = 0.44
If you are running PHP 5.3.13, then Y.Y = 5.3
If you are running PHP 5.5.0, then Y.Y=5.5
etc
php_pthreads-0.44-5.3-ts-vc9-x86.zip
php_pthreads-0.44-5.4-ts-vc9-x86.zip
php_pthreads-0.44-5.5-ts-vc11-x64.zip
php_pthreads-0.44-5.5-ts-vc11-x86.zip
and dot webdev at gmail dot com ¶
5 years ago
Also, possible by phpbrew
1. phpbrew install php-5.5.30 -- --enable-maintainer-zts
2. phpbrew use php-5.5.30
3. phpbrew ext install pthreads 2.0.10
rbfowler9lfc at hotmail dot com ¶
8 years ago
For those using XAMPP or other apache-php bundles, it's necessary to add LoadFile "C:/xampp/php/pthreadVC2.dll" to httpd-xampp.conf if you want to utilize pthreads in a browser window.
sawyer dot lin at gmail dot com ¶
7 years ago
To execute pecl install pthreads
The library autoconf shoud be installed at first
http://stackoverflow.com/questions/9322742/php-autoconf-errors-on-mac-os-x-10-7-3-when-trying-to-install-pecl-extensions
like
apt-get install pthreads
官方地址：https://www.php.net/manual/en/pthreads.installation.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
数据库
JAVA
面试
NoSQL
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
广告
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
adodb手册
ADORecordSet对象
opcache预加载
Composer的Packagist资源
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
mysql面试题
PHP json解析（json_decode）页面工具
php中几种注释规范
[原创]诡异的php-fpm超时问题
纯php实现DES以及TripleDES加密算法
php 修改图片大小
支持php7的性能采集扩展
PHP mkdir()写出来的权限与mode值不符合