Creating New Session
==========================
<?php
session_start();
/*session is started if you don't write this line can't use $_Session global variable*/
$_SESSION["newsession"]=$value;
?>
Getting Session
==========================
<?php
session_start();
/*session is started if you don't write this line can't use $_Session global variable*/
$_SESSION["newsession"]=$value;
/*session created*/
echo $_SESSION["newsession"];
/*session was getting*/
?>
Updating Session
==========================
<?php
session_start();
/*session is started if you don't write this line can't use $_Session global variable*/
$_SESSION["newsession"]=$value;
/*it is my new session*/
$_SESSION["newsession"]=$updatedvalue;
/*session updated*/
?>
Deleting Session
==========================
<?php
session_start();
/*session is started if you don't write this line can't use $_Session global variable*/
$_SESSION["newsession"]=$value;
unset($_SESSION["newsession"]);
/*session deleted. if you try using this you've got an error*/
?>
PHP - Manual: $_SESSION
2024-11-14
$_SESSION
$_SESSION — Session 变量
说明
当前脚本可用 SESSION 变量的数组。更多关于如何使用的信息，参见 Session 函数 文档。
注释
注意:
“Superglobal”也称为自动化的全局变量。这就表示其在脚本的所有作用域中都是可用的。不需要在函数或方法中用 global $variable; 来访问它。
add a note
User Contributed Notes 14 notes
Tugrul ¶
7 years ago
bohwaz ¶
13 years ago
Please note that if you have register_globals to On, global variables associated to $_SESSION variables are references, so this may lead to some weird situations.
<?php
session_start();
$_SESSION['test'] = 42;
$test = 43;
echo $_SESSION['test'];
?>
Load the page, OK it displays 42, reload the page... it displays 43.
The solution is to do this after each time you do a session_start() :
<?php
if (ini_get('register_globals'))
{
foreach ($_SESSION as $key=>$value)
{
if (isset($GLOBALS[$key]))
unset($GLOBALS[$key]);
}
}
?>
opajaap at opajaap dot nl ¶
8 years ago
Be carefull with $_SESSION array elements when you have the same name as a normal global.
The following example leads to unpredictable behaviour of the $wppa array elements, some are updated by normal code, some not, it is totally unpredictable what happens.
<?php
global $wppa;
$wppa = array( 'elm1' => 'value1', 'elm2' => 'value2', ....etc...);
if ( ! session_id() ) @ session_start();
if ( ! isset($_SESSION['wppa']) $_SESSION['wppa'] = array();
if ( ! isset($_SESSION['wppa']['album']) ) $_SESSION['wppa']['album'] = array();
$_SESSION['wppa']['album'][1234] = 1;
$wppa['elm1'] = 'newvalue1';
print_r($_SESSION);
?>
This will most likely display Array ( [wppa] => Array ( [album] => Array ( [1234] => 1 ) [elm1] => 'newvalue1' [elm2] => 'value2' ... etc ...
But setting $wppa['elm1'] to another value or referring to it gives unpredictable results, maybe 'value1', or 'newvalue1'.
The most strange behaviour is that not all elements of $wppa[xx] show up as $_SESSION['wppa'][xx].
dbagnara ¶
4 years ago
The key of values added to $_SESSION must not be numeric. An error message will be generated and the session will not be saved.
"Notice: Unknown: Skipping numeric key 1511374723 in Unknown on line 0"
Miller ¶
8 years ago
I wrote a little page for controlling/manipulating the session. Obviously, never use this on a production server, but I use it on my localhost to assist me in checking and changing session values on the fly.
Again, it makes use of eval() and exposes the session, so never use this on a web server.
<?php
error_reporting(E_ALL);
session_start();
if (isset($_POST['session'])) {
$session = eval("return {$_POST['session']};");
if (is_array($session)) {
$_SESSION = $session;
header("Location: {$_SERVER['PHP_SELF']}?saved");
}
else {
header("Location: {$_SERVER['PHP_SELF']}?error");
}
}
$session = htmlentities(var_export($_SESSION, true));
?>
<!DOCTYPE html>
<html lang="en-US">
<head>
<meta charset="UTF-8">
<title>Session Variable Management</title>
<style>
textarea { font: 12px Consolas, Monaco, monospace; padding: 2px; border: 1px solid #444444; width: 99%; }
.saved, .error { border: 1px solid #509151; background: #DDF0DD; padding: 2px; }
.error { border-color: #915050; background: #F0DDDD; }
</style>
</head>
<body>
<h1>Session Variable Management</h1>
<?php if (isset($_GET['saved'])) { ?>
<p class="saved">The session was saved successfully.</p>
<?php } else if (isset($_GET['error'])) { ?>
<p class="error">The session variable did not parse correctly.</p>
<?php } ?>
<form method="post">
<textarea name="session" rows="<?php echo count(preg_split("/\n|\r/", $session)); ?>"><?php echo $session; ?></textarea>
<input type="submit" value="Update Session">
</form>
</body>
</html>
jherry at netcourrier dot com ¶
13 years ago
You may have trouble if you use '|' in the key:
$_SESSION["foo|bar"] = "fuzzy";
This does not work for me. I think it's because the serialisation of session object is using this char so the server reset your session when it cannot read it.
To make it work I replaced '|' by '_'.
Fred ¶
8 years ago
Regarding array keys, from http://php.net/manual/en/language.types.array.php, "Strings containing valid integers will be cast to the integer type".
The manual on $_SESSION says "An associative array". So an associative array is expected literally...? It does no one any good if this bit of important info about accessing and storing session data remains buried in manual comments.
Session variables with a single number will not work, however "1a" will work, as will "a1" and even a just single letter, for example "a" will also work.
(Invalid)
1st page
<?php
session_start();
$_SESSION["1"] = "LOGGED";
?>
2nd page
<?php
session_start();
echo $_SESSION["1"];
?>
---------------------------------------------------------------
(Valid)
1st page
<?php
session_start();
$_SESSION["a"] = "LOGGED";
?>
2nd page
<?php
session_start();
echo $_SESSION["a"];
?>
---------------------------------------------------------------
(Valid)
1st page
<?php
session_start();
$_SESSION["a1"] = "LOGGED";
?>
2nd page
<?php
session_start();
echo $_SESSION["a1"];
?>
---------------------------------------------------------------
Example from PHP.net manual on Session variables
<?php
$_SESSION[1][1] = 'cake'; // fails
$_SESSION['v1'][2] = 'cake'; // works
?>
Source: http://php.net/manual/en/language.types.array.php
Dave ¶
12 years ago
If you deploy php code and cannot control whether register_globals is off, place this snippet in your code to prevent session injections:
<?php
if (isset($_REQUEST['_SESSION'])) die("Get lost Muppet!");
?>
Steve Clay ¶
13 years ago
Unlike a real PHP array, $_SESSION keys at the root level must be valid variable names.
<?php
$_SESSION[1][1] = 'cake'; // fails
$_SESSION['v1'][1] = 'cake'; // works
?>
I imagine this is an internal limitation having to do with the legacy function session_register(), where the registered global var must similarly have a valid name.
ms at meilenstein dot ms ¶
3 years ago
I would be wary to use PHP Sessions for application-critical tasks. So far, I have had very troubling experiences with random loss of session data, as described in these bug reports:
https://bugs.php.net/bug.php?id=19022
https://bugs.php.net/bug.php?id=19029
https://bugs.php.net/bug.php?id=70584
charlese at cvs dot com dot au ¶
12 years ago
I was having troubles with session variables working in some environments and being seriously flaky in others. I was using $_SESSION as an array. It works properly when I used $_SESSION as pointers to arrays. As an example the following code works in some environments and not others.
<?php
//Trouble if I treate $form_convert and $_SESSION['form_convert'] as unrelated items
$form_convert=array();
if (isset($_SESSION['form_convert'])){
$form_convert=$_SESSION['form_convert'];
}
}
?>
The following works well.
<?php
if (isset($_SESSION['form_convert'])){
$form_convert = $_SESSION['form_convert'];
}else{
$form_convert = array();
$_SESSION['form_convert']=$form_convert;
}
?>
ignasitort at gmail dot com ¶
5 years ago
I have a weird problem, when using $_SESSION to store a nonce. My nonces never match.
Maybe the PHP code is called twice (maybe is WP or maybe is the BROWSER) but Html is rendered with the first NONCE value, but as random nonce are created twice, returning PHP function (called by Javascript AJAX ) checks for the second value. As far , as I can not solve
My solution is: always check first if the NONCE exist before creating a new random value for the nonce. This way nonce cannot change if PHP called twice.
<?PHP
if (isset($_SESSION['nonce']) && !empty($_SESSION['nonce'])){
error_log("NONCE_ NOT EMPTY");
}
else
$_SESSION['nonce'] = function_rand_str(32);
?>
buckmanhands at gmail dot com ¶
5 years ago
If you are using a session variable as a token to use as a handshake on next page load and the token updates on the new page load, but they mysteriously will not match and there is no obvious explanation. I had the following happen and maybe it will save you some time.
I was making a form that allowed an image upload and had an image tag ready to drop the src of the preview in after the file was chosen. But I had a preset src of "#"... this loaded the page a second time in the background and updated my token invisibly causing a broken handshake.
My tag looked like this:
<img src="#" id="myimagepreview" alt="image preview" />
Leave the source blank and the handshake will not break.
pike-php at kw dot nl ¶
11 years ago
When accidently assigning a unset variable to $_SESSION, like
$_SESSION['foo'] = $bar
while $bar was not defined, I got the following error message:
"Warning: Unknown(): Your script possibly relies on a session side-effect which existed until PHP 4.2.3. Please be advised that the session extension does not consider global variables as a source of data, unless register_globals is enabled. "
The errormessage was quite unrelated and got me off-track. The real error was, $bar was not defined.
官方地址：https://www.php.net/manual/en/reserved.variables.session.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
PHP mkdir()写出来的权限与mode值不符合
Packagist / Composer 中国全量镜像
利用php soap实现web service
PHP获取指定函数定义在哪个文件中及行号
支持php7的性能采集扩展