略微加速

PHP官方手册 - 互联网笔记

PHP - Manual: DateInterval::__construct

2024-11-15

DateInterval::__construct

(PHP 5 >= 5.3.0, PHP 7, PHP 8)

DateInterval::__construct — Creates a new DateInterval object

说明

public DateInterval::__construct(string $duration)

Creates a new DateInterval object.

参数

duration

An interval specification.

The format starts with the letter P, for period. Each duration period is represented by an integer value followed by a period designator. If the duration contains time elements, that portion of the specification is preceded by the letter T.

duration Period Designators
Period Designator Description
Y years
M months
D days
W weeks. Converted into days. Prior to PHP 8.0.0, can not be combined with D.
H hours
M minutes
S seconds

Here are some simple examples. Two days is P2D. Two seconds is PT2S. Six years and five minutes is P6YT5M.

注意:

The unit types must be entered from the largest scale unit on the left to the smallest scale unit on the right. So years before months, months before days, days before minutes, etc. Thus one year and four days must be represented as P1Y4D, not P4D1Y.

The specification can also be represented as a date time. A sample of one year and four days would be P0001-00-04T00:00:00. But the values in this format can not exceed a given period's roll-over-point (e.g. 25 hours is invalid).

These formats are based on the » ISO 8601 duration specification.

错误／异常

Throws an Exception when the duration cannot be parsed as an interval.

更新日志

版本 说明
8.2.0 Only the y to f, invert, and days will be visible, including a new from_string boolean property.
8.0.0 W can be combined with D.

范例

示例 #1 DateInterval example

<?php

$interval = new DateInterval('P1W2D');
var_dump($interval);

?>

Output of the above example in PHP 8.2:

object(DateInterval)#1 (10) {
  ["y"]=>
  int(0)
  ["m"]=>
  int(0)
  ["d"]=>
  int(9)
  ["h"]=>
  int(0)
  ["i"]=>
  int(0)
  ["s"]=>
  int(0)
  ["f"]=>
  float(0)
  ["invert"]=>
  int(0)
  ["days"]=>
  bool(false)
  ["from_string"]=>
  bool(false)
}

以上例程在 PHP 8 中的输出：

object(DateInterval)#1 (16) {
  ["y"]=>
  int(0)
  ["m"]=>
  int(0)
  ["d"]=>
  int(9)
  ["h"]=>
  int(0)
  ["i"]=>
  int(0)
  ["s"]=>
  int(0)
  ["f"]=>
  float(0)
  ["weekday"]=>
  int(0)
  ["weekday_behavior"]=>
  int(0)
  ["first_last_day_of"]=>
  int(0)
  ["invert"]=>
  int(0)
  ["days"]=>
  bool(false)
  ["special_type"]=>
  int(0)
  ["special_amount"]=>
  int(0)
  ["have_weekday_relative"]=>
  int(0)
  ["have_special_relative"]=>
  int(0)
}

以上例程在 PHP 7 中的输出：

object(DateInterval)#1 (16) {
  ["y"]=>
  int(0)
  ["m"]=>
  int(0)
  ["d"]=>
  int(2)
  ["h"]=>
  int(0)
  ["i"]=>
  int(0)
  ["s"]=>
  int(0)
  ["f"]=>
  float(0)
  ["weekday"]=>
  int(0)
  ["weekday_behavior"]=>
  int(0)
  ["first_last_day_of"]=>
  int(0)
  ["invert"]=>
  int(0)
  ["days"]=>
  bool(false)
  ["special_type"]=>
  int(0)
  ["special_amount"]=>
  int(0)
  ["have_weekday_relative"]=>
  int(0)
  ["have_special_relative"]=>
  int(0)
}

参见

add a noteadd a note

User Contributed Notes 15 notes

up
87
owen at beliefs.com
8 years ago
M is used to indicate both months and minutes.

As noted on the referenced wikipedia page for ISO 6801 http://en.wikipedia.org/wiki/Iso8601#Durations

To resolve ambiguity, "P1M" is a one-month duration and "PT1M" is a one-minute duration (note the time designator, T, that precedes the time value).

Using: PHP 5.3.2-1ubuntu4.19

// For 3 Months
$dateTime = new DateTime;echo $dateTime->format( DateTime::ISO8601 ), PHP_EOL;
$dateTime->add(new DateInterval("P3M"));
echo $dateTime->format( DateTime::ISO8601 ), PHP_EOL;
Results in:
2013-07-11T11:12:26-0400
2013-10-11T11:12:26-0400

// For 3 Minutes
$dateTime = new DateTime;echo $dateTime->format( DateTime::ISO8601 ), PHP_EOL;
$dateTime->add(new DateInterval("PT3M"));
echo $dateTime->format( DateTime::ISO8601 ), PHP_EOL;
Results in:
2013-07-11T11:12:42-0400
2013-07-11T11:15:42-0400

Insert a T after the P in the interval to add 3 minutes instead of 3 months.
up
20
buvinghausen at gmail dot com
10 years ago
I think it is easiest if you would just use the sub method on the DateTime class.

<?php
$date = new DateTime();
$date->sub(new DateInterval("P89D"));
up
5
Hernanibus
4 years ago
It is not stated, but you cannot create directly a negative interval, this is you cannot create a "-2 days" interval as:

<?
$interval = new DateInterval("P-2D");//or
$interval = new DateInterval("-P2D");
?>

Instead you have to create first the interval and then set its 'invert' property to 1, this is:

<?
$interval = new DateInterval("P2D");
$interval->invert = 1;
?>

Then you should keep in mind that this interval acts as a negative number, hence to subtract the interval from a given date you must 'add' it:

<?
$interval = new DateInterval("P2D");
$interval->invert = 1;
$date       = new DateTime ("1978-01-23 17:46:00");
$date->add($interval)->format("Y-m-d H:i:s");//this is "1978-01-21 17:46:00"
?>
up
10
kevinpeno at gmail dot com
11 years ago
Note that, while a DateInterval object has an $invert property, you cannot supply a negative directly to the constructor similar to specifying a negative in XSD ("-P1Y"). You will get an exception through if you do this.

Instead you need to construct using a positive interval ("P1Y") and the specify the $invert property === 1.
up
9
daniellehr at gmx dot de
10 years ago
Alternatively you can use DateInterval::createFromDateString() for negative intervals:

<?php
$date = new DateTime();
$date->add(DateInterval::createFromDateString('-89 days'));
up
20
kuzb
11 years ago
It should be noted that this class will not calculate days/hours/minutes/seconds etc given a value in a single denomination of time.  For example:

<?php
    $di = new DateInterval('PT3600S');
    echo $di->format('%H:%i:%s');
   
?>

will yield 0:0:3600 instead of the expected 1:0:0
up
5
jawzx01 at gmail dot com
10 years ago
As previously mentioned, to do a negative DateInterval object, you'd code:

<?php
$date1 = new DateTime();
$eightynine_days_ago = new DateInterval( "P89D" );
$eightynine_days_ago->invert = 1; //Make it negative.
$date1->add( $eightynine_days_ago );
?>

and then $date1 is now 89 days in the past.
up
7
admin at torntech dot com
7 years ago
Warning - despite the $interval_spec accepting the ISO 8601 specification format, it does not accept decimal fraction values with period or comma as stated in the specification.

https://bugs.php.net/bug.php?id=53831

<?php
/* Example from ISO 8601 documentation */
$interval = new DateInterval('P0.5Y');
?>

Will result in
Fatal error: Uncaught exception 'Exception' with message 'DateInterval::__construct(): Unknown or bad format (P0.5Y)'
up
8
userexamplecom at mailinator dot com
6 years ago
Take care, if you have a DateTime Object on the 31h of January and add Da DateInterval of one Month, then you are in March instead of February.

For Example:
---
// given the actual date is 2017-01-31
$today = new DateTime('now', $timeZoneObject);
$today->add(new DateInterval('P1M'));
echo $today->format('m');
// output: 03
---
up
1
lsloan-php dot net at umich dot edu
6 years ago
Although PHP refers to periods of time as "intervals", ISO 8601 refers to them as "durations".  In ISO 8601, "intervals" are something else.

While ISO 8601 allows fractions for all parts of a duration (e.g., "P0.5Y"), DateInterval does not.  Use caution when calculating durations.  If the duration has a fractional part, it may be lost when storing it in a DateInterval object.
up
0
Anonymous
1 year ago
Note that to add time you must enter P even though the period is empty.

To add 1 hour :

<?php

$plusOneHour = (new DateTime('now'))->add(new DateInterval("PT1H"));

var_dump($plusOneHour);

?>
up
0
grzeniufication
2 years ago
If you'd like to persist an interval object in a DB it could be handy to implement the __toString() method. A formatted interval value can be easier to read by a human than the output of serialize. Here's an example:

<?php

namespace App;

class DateInterval extends \DateInterval
{
    public function __toString()
    {
        return $this->format('P%yY%mM%dDT%hH%iM%sS');
    }
}

$interval1 = new DateInterval('P1Y');
$interval2 = new DateInterval(strval($interval1));
assert($interval1 == $interval2);
up
0
sloanlance+php.net gmail com
4 years ago
⚠️ It's important to remember the warning about DateInterval given by "admin at torntech dot com" in an earlier comment (http://php.net/manual/en/dateinterval.construct.php#116750).  To reiterate:

Some versions of PHP (e.g., 5.6.31) have a bug that disallows fractional parts in a ISO 8601 duration string given as the argument for the DateInterval constructor.  That is, these examples will fail:

<?php
// 'P0.5Y' is valid according to ISO 8601
$interval = new DateInterval('P0.5Y');  // Throws exception
?>

<?php
// 'PT585.829S' is valid according to ISO 8601
$interval = new DateInterval('PT585.829S');  // Throws exception
?>

If this bug affects you, please go to the report for this bug in the PHP Bug Tracking System, and place a vote stating that it affects you:  https://bugs.php.net/bug.php?id=53831
up
0
Ray.Paseur sometimes uses Gmail
6 years ago
To recover the interval specification string:

<?php
function get_interval_spec(DateTime $alpha, DateTime $omega)
{
    $intvl = $alpha->diff($omega);

    $date = NULL;
    if ($intvl->y) $date .= $intvl->y . 'Y';
    if ($intvl->m) $date .= $intvl->m . 'M';
    if ($intvl->d) $date .= $intvl->d . 'D';

    $time = NULL;
    if ($intvl->h) $time .= $intvl->h . 'H';
    if ($intvl->i) $time .= $intvl->i . 'M';
    if ($intvl->s) $time .= $intvl->s . 'S';
    if ($time) $time = 'T' . $time;

    $text ='P' . $date . $time;
    if ($text == 'P') return 'PT0S';
    return $text;
}
up
-15
bkilinc at deyta dot net
8 years ago
interval_spec Period Designators, has two 'M's for months and minutes.
add a noteadd a note

官方地址：https://www.php.net/manual/en/dateinterval.construct.php

有任何技术问题请点击这里 网站运营推广招聘
IT PHP 编程语言 Linux 开发编程 科技 Elasticsearch HTML/CSS/XML 网络 JAVA NoSQL 数据库 面试 C/C++ Golang Git 算法 操作系统 正则表达式 Redis 互联网 MySql JavaScript 运维 软件 国际 架构设计 Mac OS TCP/IP Excel Vim Windows Socket Oracle VR MongoDB Python 运营 MemCache 商业 硬件 电子 娱乐 设计 nginx 摄影 游戏 WordPress HTTP 团建 数码电器
冷却塔厂家 广告
-- --
php7 安装fileinfo扩展 preg_split — 通过一个正则表达式分隔字符串 php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题 [PHP] inet_pton/inet_ntop IP地址转换函数 array_multisort() 多字段排序 PHPMailer设置utf8 PHPMailer字符集CharSet ADORecordSet对象 adodb手册 PHP 8.1 [鸟哥]PHP_INT_MIN 和 -9223372036854775808 opcache预加载 Composer的Packagist资源 mysql面试题 [鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式 PHP7添加redis扩展 PHP mkdir()写出来的权限与mode值不符合 Packagist / Composer 中国全量镜像 支持php7的性能采集扩展 php $_SERVER中的SERVER_NAME 和HTTP_HOST的区别 adodb连接mysql多个数据库的问题
联系我们 半月雨文化 可降解耗材网 蓝云环保 78免费小説 上海网站seo优化 工程造价 币安app官网下载 seo查询
北京半月雨文化科技有限公司.版权所有 京ICP备12026184号-3