If you want to reverse a date interval use array_reverse and iterator_to_array. I've found using invert to be unreliable.
<?php
$start_date = date_create("2021-01-01");
$end_date = date_create("2021-01-05"); // If you want to include this date, add 1 day
$interval = DateInterval::createFromDateString('1 day');
$daterange = new DatePeriod($start_date, $interval ,$end_date);
foreach($daterange as $date1){
echo $date1->format('Y-m-d').'<br>';
}
echo '<br>';
// reverse the array
$daterange = array_reverse(iterator_to_array($daterange));
foreach($daterange as $date1){
echo $date1->format('Y-m-d').'<br>';
}
?>
Gives
2021-01-01
2021-01-02
2021-01-03
2021-01-04
2021-01-04
2021-01-03
2021-01-02
2021-01-01
PHP - Manual: DateInterval
2024-12-21
DateInterval 类
(PHP 5 >= 5.3.0, PHP 7, PHP 8)
简介
表示一个时间周期的类。
一个时间周期表示固定量的时间（多少年，月，天，小时等）， 也可以表示一个字符串格式的相对时间， 当表示相对时间的时候，字符串格式是 DateTime 类的构造函数所支持的格式。
类摘要
class DateInterval
{
/* 属性 */
/* 方法 */
}属性
- y
-
多少年。
- m
-
多少月。
- d
-
多少天。
- h
-
多少小时。
- i
-
多少分钟。
- s
-
多少秒。
- f
-
多少微秒。
- invert
-
1表示一个负的时间周期，0表示一个正的时间周期。 请参见： DateInterval::format(). - days
-
如果 DateInterval 对象是由 DateTime::diff() 函数创建的， 那么它表示开始日期和结束日期之间包含了多少天。 否则，days 属性为
false。在 PHP 5.4.20/5.5.4 之前版本中，此属性不会为
false， 而是 -99999。
更新日志
| 版本 | 说明 |
|---|---|
| 7.1.0 | 增加 f 属性。 |
目录
- DateInterval::__construct — Creates a new DateInterval object
- DateInterval::createFromDateString — Sets up a DateInterval from the relative parts of the string
- DateInterval::format — Formats the interval
add a note
User Contributed Notes 19 notes
cb ¶
6 months ago
trap-phpdocs-06022017 at skvorc dot me ¶
5 years ago
IRT note below: from PHP 7.0+, split seconds get returned, too, and will be under the `f` property.
ruth45007 ¶
3 years ago
Just tried the code submitted earlier on php 7.2.16:
<?php
$d1=new DateTime("2012-07-08 11:14:15.638276");
$d2=new DateTime("2012-07-08 11:14:15.889342");
$diff=$d2->diff($d1);
print_r( $diff ) ;
?>
and it now DOES return microsecond differences, in the key 'f':
<?php
DateInterval Object
(
[y] => 0
[m] => 0
[d] => 0
[h] => 0
[i] => 0
[s] => 0
[f] => 0.251066
[weekday] => 0
[weekday_behavior] => 0
[first_last_day_of] => 0
[invert] => 1
[days] => 0
[special_type] => 0
[special_amount] => 0
[have_weekday_relative] => 0
[have_special_relative] => 0
)
?>
php at keith tyler dot com ¶
10 years ago
DateInterval does not support split seconds (microseconds or milliseconds etc.) when doing a diff between two DateTime objects that contain microseconds.
So you cannot do the following, for example:
<?php
$d1=new DateTime("2012-07-08 11:14:15.638276");
$d2=new DateTime("2012-07-08 11:14:15.889342");
$diff=$d2->diff($d1);
print_r( $diff ) ;
/* returns:
DateInterval Object
(
[y] => 0
[m] => 0
[d] => 0
[h] => 0
[i] => 0
[s] => 0
[invert] => 0
[days] => 0
)
*/
?>
You get back 0 when you actually want to get 0.251066 seconds.
p dot scheit at ps-webforge dot com ¶
11 years ago
If you want to convert a Timespan given in Seconds into an DateInterval Object you could dot the following:
<?php
$dv = new DateInterval('PT'.$timespan.'S');
?>
but wenn you look at the object, only the $dv->s property is set.
As stated in the documentation to DateInterval::format
The DateInterval::format() method does not recalculate carry over points in time strings nor in date segments. This is expected because it is not possible to overflow values like "32 days" which could be interpreted as anything from "1 month and 4 days" to "1 month and 1 day".
If you still want to calculate the seconds into hours / days / years, etc do the following:
<?php
$d1 = new DateTime();
$d2 = new DateTime();
$d2->add(new DateInterval('PT'.$timespan.'S'));
$iv = $d2->diff($d1);
?>
$iv is an DateInterval set with days, years, hours, seconds, etc ...
nateb at gurutechnologies dot net ¶
2 years ago
Many people have commented on doing a reverse interval on a date time. I personally find a backwards year to be a little strange to think about and instead opt to work with just intervals. This is the easiest I have found.
<?php
$one_year = new DateInterval('P1Y');
$one_year_ago = new DateTime();
$one_year_ago->sub($one_year);
?>
Instead of:
<?php
$one_year_ago = new DateInterval( "P1Y" );
$one_year_ago->invert = 1;
$one_year_ago = new DateTime();
$one_year_ago->add($one_year);
?>
Aurelien Marchand ¶
2 years ago
Please note that the hour field can be negative, especially in the context of switching to/from Daylight savings.
Example:
<?php
$tz = new DateTimeZone("America/New_York");
$date_1 = new DateTime("2019-10-30 15:00:00",$tz);
$date_2 = new DateTime("2019-11-21 14:30:20",$tz);
echo $date_2->diff($date_1)->format("%a:%h:%i:%s");
// returns 21:-1:30:20
0bccbf3a at opayq dot com ¶
8 years ago
invert flag is unreliable.
If you've created interval with \DateInterval::createFromDateString with value like '1 day ago' than actually days counter will be negative, and invert flag will be 0. Also, setting invert to 1 with negative units is not working.
Reliable solution to check if interval is negative is to actually apply it and compare:
<?php
private function isNegative(\DateInterval $interval)
{
$now = new \DateTimeImmutable();
$newTime = $now->add($interval);
return $newTime < $now;
}
?>
Also, if you want to compare some units of two intervals you should take abs() of them. Or make whole interval absolute:
<?php
private function absInterval(\DateInterval $interval)
{
$now = new \DateTimeImmutable();
$new = $now->add($interval);
$newInt = $now->diff($new);
if (1 === $newInt->invert) {
$newInt->invert = 0;
}
return $newInt;
}
?>
P.S.: tested on 5.5.12-dev and 5.5.9
Miller ¶
8 years ago
This DateInterval extension allows you to write a formatted timestamp but omit the "zero values" and handle things like listing, plurals, etc.
Example input: '%y year(s)', '%m month(s)', '%d day(s)', '%h hour(s)', '%i minute(s)', '%s second(s)'
Example output: 1 year, 2 months, 16 days, 1 minute, and 15 seconds
Example input: '%y año(s)', '%m mes(es)', '%d día(s)', '%h hora(s)', '%i minuto(s)', '%s segundo(s)'
Example output: 1 año, 2 meses, 16 días, 1 minuto, y 15 segundos
<meta charset="UTF-8">
<?php
error_reporting(E_ALL);
class MyDateInterval extends DateInterval {
public
$pluralCheck = '()',
// Must be exactly 2 characters long
// The first character is the opening brace, the second the closing brace
// Text between these braces will be used if > 1, or replaced with $this->singularReplacement if = 1
$singularReplacement = '',
// Replaces $this->pluralCheck if = 1
// hour(s) -> hour
$separator = ', ',
// Delimiter between units
// 3 hours, 2 minutes
$finalSeparator = ', and ',
// Delimeter between next-to-last unit and last unit
// 3 hours, 2 minutes, and 1 second
$finalSeparator2 = ' and ';
// Delimeter between units if there are only 2 units
// 3 hours and 2 minutes
public static function createFromDateInterval (DateInterval $interval) {
$obj = new self('PT0S');
foreach ($interval as $property => $value) {
$obj->$property = $value;
}
return $obj;
}
public function formatWithoutZeroes () {
// Each argument may have only one % parameter
// Result does not handle %R or %r -- but you can retrieve that information using $this->format('%R') and using your own logic
$parts = array ();
foreach (func_get_args() as $arg) {
$pre = mb_substr($arg, 0, mb_strpos($arg, '%'));
$param = mb_substr($arg, mb_strpos($arg, '%'), 2);
$post = mb_substr($arg, mb_strpos($arg, $param)+mb_strlen($param));
$num = intval(parent::format($param));
$open = preg_quote($this->pluralCheck[0], '/');
$close = preg_quote($this->pluralCheck[1], '/');
$pattern = "/$open(.*)$close/";
list ($pre, $post) = preg_replace($pattern, $num == 1 ? $this->singularReplacement : '$1', array ($pre, $post));
if ($num != 0) {
$parts[] = $pre.$num.$post;
}
}
$output = '';
$l = count($parts);
foreach ($parts as $i => $part) {
$output .= $part.($i < $l-2 ? $this->separator : ($l == 2 ? $this->finalSeparator2 : ($i == $l-2 ? $this->finalSeparator : '')));
}
return $output;
}
}
date_default_timezone_set('America/Phoenix');
$today = new DateTime('today');
echo 'Today is ', $today->format('F d, Y h:ia'), '.<br>', PHP_EOL;
// Today is August 28, 2013 12:00am.<br>
$expiration = new DateTime('today +1 year +2 months +16 days +1 minute +15 seconds');
echo 'Expires ', $expiration->format('F d, Y h:ia'), '.<br>', PHP_EOL;
// Expires November 13, 2014 12:01am.<br>
$interval = MyDateInterval::createFromDateInterval($today->diff($expiration));
echo 'That is ', $interval->formatWithoutZeroes('%y year(s)', '%m month(s)', '%d day(s)', '%h hour(s)', '%i minute(s)', '%s second(s)'), ' from now.<br>', PHP_EOL;
// That is 1 year, 2 months, 16 days, 1 minute, and 15 seconds from now.
$interval->finalSeparator = ', y ';
$interval->finalSeparator2 = ' y ';
echo 'Que es de ', $interval->formatWithoutZeroes('%y año(s)', '%m mes(es)', '%d día(s)', '%h hora(s)', '%i minuto(s)', '%s segundo(s)'), ' a partir de ahora.';
// Que es de 1 año, 2 meses, 16 días, 1 minuto, y 15 segundos a partir de ahora.
// Is that correct? Spanish isn't my strength....
?>
theDustin ¶
8 years ago
If you want to format a \DateInterval to something like you input (new \DateInterval("P3W2D")) you can use one of this:
<?php
class MyDateInterval extends \DateInterval
{
/**
* formating string like ISO 8601 (PnYnMnDTnHnMnS)
*/
const INTERVAL_ISO8601 = 'P%yY%mM%dDT%hH%iM%sS';
/**
* formating the interval like ISO 8601 (PnYnMnDTnHnMnS)
*
* @return string
*/
function __toString()
{
$sReturn = 'P';
if($this->y){
$sReturn .= $this->y . 'Y';
}
if($this->m){
$sReturn .= $this->m . 'M';
}
if($this->d){
$sReturn .= $this->d . 'D';
}
if($this->h || $this->i || $this->s){
$sReturn .= 'T';
if($this->h){
$sReturn .= $this->h . 'H';
}
if($this->i){
$sReturn .= $this->i . 'M';
}
if($this->s){
$sReturn .= $this->s . 'S';
}
}
return $sReturn;
}
}
?>
example use:
<?php
$oDateIntervalValue = new MyDateInterval('P3M');
$sFormatResult = $oDateIntervalValue->format(MyDateInterval::INTERVAL_ICALENDAR); // "P0Y3M0DT0H0M0S"
$sToStringResult = (string) $oDateIntervalValue; // "P3M"
var_dump(new MyDateInterval($sFormatResult)); // object like $oDateIntervalValue
var_dump(new MyDateInterval($sToStringResult)); // object like $oDateIntervalValue
?>
KEINOS ¶
2 years ago
Note that you CAN NOT get the exact time in seconds from a \DateInterval object.
The reason is simple. While adding the properties up, you can not determine the days of the month.
<?php
function getTTL(\DateInterval $ttl): int
{
$secs = (isset($ttl->f) ? ($ttl->f): 0)
+ ($ttl->s)
+ ($ttl->i * 60)
+ ($ttl->h * 60 * 60)
+ ($ttl->d * 60 * 60 * 24)
+ ($ttl->m * 60 * 60 * 24 * 30) //Feb. is 28 days, 29 in an intercalary year
+ ($ttl->y * 60 * 60 * 24 * 365);
return intval(round($secs));
}
?>
So, keep in mind that \DateInterval is something to add-on to time.
<?php
function getTTL(\DateInterval $ttl): int
{
// Find seconds from it's current state of time
$secs = \DateTime::createFromFormat('U', '0')->add($ttl)->format('U');
return intval(abs($secs));
}
?>
Anonymous ¶
2 years ago
//create a date
$now = new \DateTime();
//create a specific date
$someDate = \DateTime::createFromFormat("Y-m-d H:i", "2019-12-19 15:27")
//Add one day
$someDate->add(new DateInterval("P1D"));
//convert to string
echo $someDate->format("Y-m-d"); //2019-12-20
artur at qrupa dot com ¶
9 years ago
When using DateInterval('P3M') on 30th of November you get March instead of Ferbuary.
cmygind@tsccorp dot com ¶
7 years ago
You can create a series of dates starting with the first day of the week for each week, if you wish to populate list box on your web page with this date math. Use the absolute abs( ) function to convert negative numbers generated from dates in the past.
<?php
$TwoWeeksAgo = new DateTime(date("Ymd"));
$TwoWeeksAgo->sub(new DateInterval('P'.abs ( (7-date("N")-14)).'D'));
$LastWeek = new DateTime(date("Ymd"));
$LastWeek->sub(new DateInterval('P'.abs ( (7-date("N")-7)).'D'));
$ThisWeek = new DateTime(date("Ymd"));
$ThisWeek->add(new DateInterval('P'.abs ( (7-date("N"))).'D'));
echo 'Start of This week is '.$ThisWeek->format('l m/d/Y').'<br/>';
echo 'Start of Last week is '.$LastWeek->format('l m/d/Y').'<br/>';
echo 'Start of 2 weeks ago is '.$TwosWeekAgo->format('l m/d/Y').'<br/>';
?>
computrius ¶
8 years ago
It appears that they "days" property that is populated by \DateTime::diff does not contain a float for the differences in time.
It is rounded down to the nearest whole day.
$d1 = new \DateTime("2013-07-31 10:29:00");
$d2 = new \DateTime("2013-08-02 5:32:12");
echo $d1->diff($d2)->days;
Output: 1
Joan ¶
8 years ago
I had the doubt after reading this page on how to create negative intervals. So far the only solution is to create the interval and negativize it.
<?php
$date1 = new DateTime();
$eightynine_days_ago = new DateInterval( "P89D" );
$eightynine_days_ago->invert = 1; //Make it negative.
$date1->add( $eightynine_days_ago );
?>
and then $date1 is now 89 days in the past.
This information is extracted from another php comment http://www.php.net/manual/en/dateinterval.construct.php#102976 but this page seems to be the first place where people will look for it.
youssef dot benhssaien at gmail dot com ¶
2 years ago
Note that to get the next day (like : +1 day, +1 week, ...)
<?php $date = date_create('last monday of december last year')->add(\DateInterval::createFromDateString('+1 monday')); ?>
will not return the next monday, but the same monday passed as date_create() parameter.
To get the next monday even pass +2 instead of +1 or next monday :
<?php $date = date_create('last monday of december last year')->add(\DateInterval::createFromDateString('next monday')); ?>
tothsanka at gmail dot com ¶
2 years ago
Be careful!
2020-01-04 10:00:00
2020-01-05 10:00:00
->s will return 0, because the second difference is 0.
till at php dot net ¶
8 years ago
It should be noted that the following code will not throw an exception or return false, or anything:
<?php
$interval = new \DateInterval::createFromDateString("this is not a date interval");
?>
Your best way to check if what you created is a "valid" interval, by doing something like the following:
<?php
$interval = new \DateInterval::createFromDateString("this is not a date interval");
if (0 == $interval->format('s')) {
throw new \LogicException("Wrong interval");
}
?>
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
数据库
JAVA
面试
NoSQL
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
广告
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
adodb手册
ADORecordSet对象
opcache预加载
Composer的Packagist资源
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
mysql面试题
PHP json解析（json_decode）页面工具
[原创]诡异的php-fpm超时问题
php中几种注释规范
纯php实现DES以及TripleDES加密算法
php 修改图片大小
支持php7的性能采集扩展
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式