[If you haven't yet] been able to find a simple conversion back to string from a parsed url, here's an example:
<?php
$url = 'http://usr:pss@example.com:81/mypath/myfile.html?a=b&b[]=2&b[]=3#myfragment';
if ($url === unparse_url(parse_url($url))) {
print "YES, they match!\n";
}
function unparse_url($parsed_url) {
$scheme = isset($parsed_url['scheme']) ? $parsed_url['scheme'] . '://' : '';
$host = isset($parsed_url['host']) ? $parsed_url['host'] : '';
$port = isset($parsed_url['port']) ? ':' . $parsed_url['port'] : '';
$user = isset($parsed_url['user']) ? $parsed_url['user'] : '';
$pass = isset($parsed_url['pass']) ? ':' . $parsed_url['pass'] : '';
$pass = ($user || $pass) ? "$pass@" : '';
$path = isset($parsed_url['path']) ? $parsed_url['path'] : '';
$query = isset($parsed_url['query']) ? '?' . $parsed_url['query'] : '';
$fragment = isset($parsed_url['fragment']) ? '#' . $parsed_url['fragment'] : '';
return "$scheme$user$pass$host$port$path$query$fragment";
}
?>
PHP - Manual: parse_url
2024-12-21
parse_url
(PHP 4, PHP 5, PHP 7, PHP 8)
parse_url — 解析 URL，返回其组成部分
说明
本函数解析一个 URL 并返回一个关联数组，包含在 URL 中出现的各种组成部分。
本函数不是用来验证给定 URL 的合法性的，只是将其分解为下面列出的部分。不完整的 URL 也被接受，parse_url() 会尝试尽量正确地将其解析。
参数
-
url -
要解析的 URL。无效字符将使用
_来替换。
-
component -
指定
PHP_URL_SCHEME、PHP_URL_HOST、PHP_URL_PORT、PHP_URL_USER、PHP_URL_PASS、PHP_URL_PATH、PHP_URL_QUERY或PHP_URL_FRAGMENT的其中一个来获取 URL 中指定的部分的 string。 （除了指定为PHP_URL_PORT后，将返回一个 integer 的值）。
返回值
对严重不合格的 URL，parse_url() 可能会返回
false。
如果省略了 component 参数，将返回一个关联数组 array，在目前至少会有一个元素在该数组中。数组中可能的键有以下几种：
- scheme - 如 http
- host
- port
- user
- pass
- path
-
query - 在问号
?之后 -
fragment - 在散列符号
#之后
如果指定了 component 参数，
parse_url() 返回一个 string （或在指定为 PHP_URL_PORT 时返回一个 integer）而不是 array。如果 URL 中指定的组成部分不存在，将会返回 null。
更新日志
| 版本 | 说明 |
|---|---|
| 5.4.7 | 修复了 host 在 协议 省略时的识别。 |
| 5.3.3 |
在 URL 解析失败时将不会产生 E_WARNING 级别的错误。
|
| 5.1.2 | 增加了参数 component。 |
范例
示例 #1 parse_url() 例子
<?php
$url = 'http://username:password@hostname/path?arg=value#anchor';
print_r(parse_url($url));
echo parse_url($url, PHP_URL_PATH);
?>
以上例程会输出：
Array
(
[scheme] => http
[host] => hostname
[user] => username
[pass] => password
[path] => /path
[query] => arg=value
[fragment] => anchor
)
/path
示例 #2 parse_url() 解析丢失协议的例子
<?php
$url = '//www.example.com/path?googleguy=googley';
// 在 5.4.7 之前这会输出路径 "//www.example.com/path"
var_dump(parse_url($url));
?>
以上例程会输出：
array(3) {
["host"]=>
string(15) "www.example.com"
["path"]=>
string(5) "/path"
["query"]=>
string(17) "googleguy=googley"
}
注释
注意:
本函数不能用于相对 URL。
注意:
parse_url() 是专门用来解析 URL 而不是 URI 的。不过为遵从 PHP 向后兼容的需要有个例外，对 file:// 协议允许三个斜线（file:///...）。其它任何协议都不能这样。
参见
- pathinfo() - 返回文件路径的信息
- parse_str() - 将字符串解析成多个变量
- http_build_query() - 生成 URL-encode 之后的请求字符串
- http_build_url()
- dirname() - 返回路径中的目录部分
- basename() - 返回路径中的文件名部分
- » RFC 3986
add a note
User Contributed Notes 35 notes
thomas at gielfeldt dot com ¶
10 years ago
lauris () lauris ! lv ¶
8 years ago
Here is utf-8 compatible parse_url() replacement function based on "laszlo dot janszky at gmail dot com" work. Original incorrectly handled URLs with user:pass. Also made PHP 5.5 compatible (got rid of now deprecated regex /e modifier).
<?php
/**
* UTF-8 aware parse_url() replacement.
*
* @return array
*/
function mb_parse_url($url)
{
$enc_url = preg_replace_callback(
'%[^:/@?&=#]+%usD',
function ($matches)
{
return urlencode($matches[0]);
},
$url
);
$parts = parse_url($enc_url);
if($parts === false)
{
throw new \InvalidArgumentException('Malformed URL: ' . $url);
}
foreach($parts as $name => $value)
{
$parts[$name] = urldecode($value);
}
return $parts;
}
?>
mys5droid at gmail dot com ¶
6 years ago
I have coded a function which converts relative URL to absolute URL for a project of mine. Considering I could not find it elsewhere, I figured I would post it here.
The following function takes in 2 parameters, the first parameter is the URL you want to convert from relative to absolute, and the second parameter is a sample of the absolute URL.
Currently it does not resolve '../' in the URL, only because I do not need it. Most webservers will resolve this for you. If you want it to resolve the '../' in the path, it just takes minor modifications.
<?php
function relativeToAbsolute($inurl, $absolute) {
// Get all parts so not getting them multiple times :)
$absolute_parts = parse_url($absolute);
// Test if URL is already absolute (contains host, or begins with '/')
if ( (strpos($inurl, $absolute_parts['host']) == false) ) {
// Define $tmpurlprefix to prevent errors below
$tmpurlprefix = "";
// Formulate URL prefix (SCHEME)
if (!(empty($absolute_parts['scheme']))) {
// Add scheme to tmpurlprefix
$tmpurlprefix .= $absolute_parts['scheme'] . "://";
}
// Formulate URL prefix (USER, PASS)
if ((!(empty($absolute_parts['user']))) and (!(empty($absolute_parts['pass'])))) {
// Add user:port to tmpurlprefix
$tmpurlprefix .= $absolute_parts['user'] . ":" . $absolute_parts['pass'] . "@";
}
// Formulate URL prefix (HOST, PORT)
if (!(empty($absolute_parts['host']))) {
// Add host to tmpurlprefix
$tmpurlprefix .= $absolute_parts['host'];
// Check for a port, add if exists
if (!(empty($absolute_parts['port']))) {
// Add port to tmpurlprefix
$tmpurlprefix .= ":" . $absolute_parts['port'];
}
}
// Formulate URL prefix (PATH) and only add it if the path to image does not include ./
if ( (!(empty($absolute_parts['path']))) and (substr($inurl, 0, 1) != '/') ) {
// Get path parts
$path_parts = pathinfo($absolute_parts['path']);
// Add path to tmpurlprefix
$tmpurlprefix .= $path_parts['dirname'];
$tmpurlprefix .= "/";
}
else {
$tmpurlprefix .= "/";
}
// Lets remove the '/'
if (substr($inurl, 0, 1) == '/') { $inurl = substr($inurl, 1); }
// Lets remove the './'
if (substr($inurl, 0, 2) == './') { $inurl = substr($inurl, 2); }
return $tmpurlprefix . $inurl;
}
else {
// Path is already absolute. Return it :)
return $inurl;
}
}
// Define a sample absolute URL
$absolute = "http://" . "user:pass@example.com:8080/path/to/index.html"; // Just evading php.net spam filter, not sure how example.com is spam...
/* EXAMPLE 1 */
echo relativeToAbsolute($absolute, $absolute) . "\n";
/* EXAMPLE 2 */
echo relativeToAbsolute("img.gif", $absolute) . "\n";
/* EXAMPLE 3 */
echo relativeToAbsolute("/img.gif", $absolute) . "\n";
/* EXAMPLE 4 */
echo relativeToAbsolute("./img.gif", $absolute) . "\n";
/* EXAMPLE 5 */
echo relativeToAbsolute("../img.gif", $absolute) . "\n";
/* EXAMPLE 6 */
echo relativeToAbsolute("images/img.gif", $absolute) . "\n";
/* EXAMPLE 7 */
echo relativeToAbsolute("/images/img.gif", $absolute) . "\n";
/* EXAMPLE 8 */
echo relativeToAbsolute("./images/img.gif", $absolute) . "\n";
/* EXAMPLE 9 */
echo relativeToAbsolute("../images/img.gif", $absolute) . "\n";
?>
OUTPUTS:
http :// user:pass@example.com:8080/path/to/index.html
http :// user:pass@example.com:8080/path/to/img.gif
http :// user:pass@example.com:8080/img.gif
http :// user:pass@example.com:8080/path/to/img.gif
http :// user:pass@example.com:8080/path/to/../img.gif
http :// user:pass@example.com:8080/path/to/images/img.gif
http :// user:pass@example.com:8080/images/img.gif
http :// user:pass@example.com:8080/path/to/images/img.gif
http :// user:pass@example.com:8080/path/to/../images/img.gif
Sorry if the above code is not your style, or if you see it as "messy" or you think there is a better way to do it. I removed as much of the white space as possible.
Improvements are welcome :)
jerome at chaman dot ca ¶
7 years ago
It may be worth reminding that the value of the #fragment never gets sent to the server. Anchors processing is exclusively client-side.
james at roundeights dot com ¶
12 years ago
I was writing unit tests and needed to cause this function to kick out an error and return FALSE in order to test a specific execution path. If anyone else needs to force a failure, the following inputs will work:
<?php
parse_url("http:///example.com");
parse_url("http://:80");
parse_url("http://user@:80");
?>
ivijan dot stefan at gmail dot com ¶
8 years ago
Here's a good way to using parse_url () gets the youtube link.
This function I used in many works:
<?php
function youtube($url, $width=560, $height=315, $fullscreen=true)
{
parse_str( parse_url( $url, PHP_URL_QUERY ), $my_array_of_vars );
$youtube= '<iframe allowtransparency="true" scrolling="no" width="'.$width.'" height="'.$height.'" src="//www.youtube.com/embed/'.$my_array_of_vars['v'].'" frameborder="0"'.($fullscreen?' allowfullscreen':NULL).'></iframe>';
return $youtube;
}
// show youtube on my page
$url='http://www.youtube.com/watch?v=yvTd6XxgCBE';
youtube($url, 560, 315, true);
?>
parse_url () allocates a unique youtube code and put into iframe link and displayed on your page. The size of the videos choose yourself.
Enjoy.
to1ne at hotmail dot com ¶
14 years ago
Based on the idea of "jbr at ya-right dot com" have I been working on a new function to parse the url:
<?php
function parseUrl($url) {
$r = "^(?:(?P<scheme>\w+)://)?";
$r .= "(?:(?P<login>\w+):(?P<pass>\w+)@)?";
$r .= "(?P<host>(?:(?P<subdomain>[\w\.]+)\.)?" . "(?P<domain>\w+\.(?P<extension>\w+)))";
$r .= "(?::(?P<port>\d+))?";
$r .= "(?P<path>[\w/]*/(?P<file>\w+(?:\.\w+)?)?)?";
$r .= "(?:\?(?P<arg>[\w=&]+))?";
$r .= "(?:#(?P<anchor>\w+))?";
$r = "!$r!"; // Delimiters
preg_match ( $r, $url, $out );
return $out;
}
print_r ( parseUrl ( 'me:you@sub.site.org:29000/pear/validate.html?happy=me&sad=you#url' ) );
?>
This returns:
Array
(
[0] => me:you@sub.site.org:29000/pear/validate.html?happy=me&sad=you#url
[scheme] =>
[1] =>
[login] => me
[2] => me
[pass] => you
[3] => you
[host] => sub.site.org
[4] => sub.site.org
[subdomain] => sub
[5] => sub
[domain] => site.org
[6] => site.org
[extension] => org
[7] => org
[port] => 29000
[8] => 29000
[path] => /pear/validate.html
[9] => /pear/validate.html
[file] => validate.html
[10] => validate.html
[arg] => happy=me&sad=you
[11] => happy=me&sad=you
[anchor] => url
[12] => url
)
So both named and numbered array keys are possible.
It's quite advanced, but I think it works in any case... Let me know if it doesn't...
adrian-php at sixfingeredman dot net ¶
14 years ago
Here's a function which implements resolving a relative URL according to RFC 2396 section 5.2. No doubt there are more efficient implementations, but this one tries to remain close to the standard for clarity. It relies on a function called "unparse_url" to implement section 7, left as an exercise for the reader (or you can substitute the "glue_url" function posted earlier).
<?php
/**
* Resolve a URL relative to a base path. This happens to work with POSIX
* filenames as well. This is based on RFC 2396 section 5.2.
*/
function resolve_url($base, $url) {
if (!strlen($base)) return $url;
// Step 2
if (!strlen($url)) return $base;
// Step 3
if (preg_match('!^[a-z]+:!i', $url)) return $url;
$base = parse_url($base);
if ($url{0} == "#") {
// Step 2 (fragment)
$base['fragment'] = substr($url, 1);
return unparse_url($base);
}
unset($base['fragment']);
unset($base['query']);
if (substr($url, 0, 2) == "//") {
// Step 4
return unparse_url(array(
'scheme'=>$base['scheme'],
'path'=>$url,
));
} else if ($url{0} == "/") {
// Step 5
$base['path'] = $url;
} else {
// Step 6
$path = explode('/', $base['path']);
$url_path = explode('/', $url);
// Step 6a: drop file from base
array_pop($path);
// Step 6b, 6c, 6e: append url while removing "." and ".." from
// the directory portion
$end = array_pop($url_path);
foreach ($url_path as $segment) {
if ($segment == '.') {
// skip
} else if ($segment == '..' && $path && $path[sizeof($path)-1] != '..') {
array_pop($path);
} else {
$path[] = $segment;
}
}
// Step 6d, 6f: remove "." and ".." from file portion
if ($end == '.') {
$path[] = '';
} else if ($end == '..' && $path && $path[sizeof($path)-1] != '..') {
$path[sizeof($path)-1] = '';
} else {
$path[] = $end;
}
// Step 6h
$base['path'] = join('/', $path);
}
// Step 7
return unparse_url($base);
}
?>
laszlo dot janszky at gmail dot com ¶
10 years ago
Created another parse_url utf-8 compatible function.
<?php
function mb_parse_url($url) {
$encodedUrl = preg_replace('%[^:/?#&=\.]+%usDe', 'urlencode(\'$0\')', $url);
$components = parse_url($encodedUrl);
foreach ($components as &$component)
$component = urldecode($component);
return $components;
}
?>
zappascripts at gmail com ¶
4 years ago
Here's a simple class I made that makes use of this parse_url.
I needed a way for a page to retain get parameters but also edit or add onto them.
I also had some pages that needed the same GET paramaters so I also added a way to change the path.
<?php
class Paths{
private $url;
public function __construct($url){
$this->url = parse_url($url);
}
public function returnUrl(){
$return = $this->url['path'].'?'.$this->url['query'];
$return = (substr($return,-1) == "&")? substr($return,0,-1) : $return;
$this->resetQuery();
return $return;
}
public function changePath($path){
$this->url['path'] = $path;
}
public function editQuery($get,$value){
$parts = explode("&",$this->url['query']);
$return = "";
foreach($parts as $p){
$paramData = explode("=",$p);
if($paramData[0] == $get){
$paramData[1] = $value;
}
$return .= implode("=",$paramData).'&';
}
$this->url['query'] = $return;
}
public function addQuery($get,$value){
$part = $get."=".$value;
$and = ($this->url['query'] == "?") ? "" : "&";
$this->url['query'] .= $and.$part;
}
public function checkQuery($get){
$parts = explode("&",$this->url['query']);
foreach($parts as $p){
$paramData = explode("=",$p);
if($paramData[0] == $get)
return true;
}
return false;
}
public function buildQuery($get,$value){
if($this->checkQuery($get))
$this->editQuery($get,$value);
else
$this->addQuery($get,$value);
}
public function resetQuery(){
$this->url = parse_url($_SERVER['REQUEST_URI']);
}
}
?>
Useage:
Test.php?foo=1:
<?php
$path = new Paths($_SERVER['REQUEST_URI']);
$path->changePath("/baz.php");
$path->buildQuery("foo",2);
$path->buildQuery("bar",3);
echo $path->returnUrl();
?>
returns: /baz.php?foo=2&bar=3
Hope this is of some use to someone!
utilmind ¶
8 years ago
parse_url doesn't works if the protocol doesn't specified. This seems like sandard, even the youtube doesn't gives the protocol name when generates code for embedding which have a look like "//youtube.com/etc".
So, to avoid bug, you must always check, whether the provided url has the protocol, and if not (starts with 2 slashes) -- add the "http:" prefix.
vdklah at hotmail dot com ¶
13 years ago
Some example that determines the URL port.
When port not specified, it derives it from the scheme.
<?php
function getUrlPort( $urlInfo )
{
if( isset($urlInfo['port']) ) {
$port = $urlInfo['port'];
} else { // no port specified; get default port
if (isset($urlInfo['scheme']) ) {
switch( $urlInfo['scheme'] ) {
case 'http':
$port = 80; // default for http
break;
case 'https':
$port = 443; // default for https
break;
case 'ftp':
$port = 21; // default for ftp
break;
case 'ftps':
$port = 990; // default for ftps
break;
default:
$port = 0; // error; unsupported scheme
break;
}
} else {
$port = 0; // error; unknown scheme
}
}
return $port;
}
$url = "http://nl3.php.net/manual/en/function.parse-url.php";
$urlInfo = parse_url( $url );
$urlPort = getUrlPort( $urlInfo );
if( $urlPort !== 0 ) {
print 'Found URL port: '.$urlPort;
} else {
print 'ERROR: Could not find port at URL: '.$url;
}
?>
demerit ¶
4 years ago
There is a change in PHP 7 (I noticed it in 7.1 upgrading from 5.3) where if the password portion has an octothorpe (#) in it, parsing fails in 7.1, whereas it succeeds in 5.3.
therselman at gmail ¶
10 years ago
UTF-8 aware parse_url() replacement.
I've realized that even though UTF-8 characters are not allowed in URL's, I have to work with a lot of them and parse_url() will break.
Based largely on the work of "mallluhuct at gmail dot com", I added parse_url() compatible "named values" which makes the array values a lot easier to work with (instead of just numbers). I also implemented detection of port, username/password and a back-reference to better detect URL's like this: //en.wikipedia.com
... which, although is technically an invalid URL, it's used extensively on sites like wikipedia in the href of anchor tags where it's valid in browsers (one of the types of URL's you have to support when crawling pages). This will be accurately detected as the host name instead of "path" as in all other examples.
I will submit my complete function (instead of just the RegExp) which is an almost "drop-in" replacement for parse_url(). It returns a cleaned up array (or false) with values compatible with parse_url(). I could have told the preg_match() not to store the unused extra values, but it would complicate the RegExp and make it more difficult to read, understand and extend. The key to detecting UTF-8 characters is the use of the "u" parameter in preg_match().
<?php
function parse_utf8_url($url)
{
static $keys = array('scheme'=>0,'user'=>0,'pass'=>0,'host'=>0,'port'=>0,'path'=>0,'query'=>0,'fragment'=>0);
if (is_string($url) && preg_match(
'~^((?P<scheme>[^:/?#]+):(//))?((\\3|//)?(?:(?P<user>[^:]+):(?P<pass>[^@]+)@)?(?P<host>[^/?:#]*))(:(?P<port>\\d+))?' .
'(?P<path>[^?#]*)(\\?(?P<query>[^#]*))?(#(?P<fragment>.*))?~u', $url, $matches))
{
foreach ($matches as $key => $value)
if (!isset($keys[$key]) || empty($value))
unset($matches[$key]);
return $matches;
}
return false;
}
?>
UTF-8 URL's can/should be "normalized" after extraction with this function.
ap dot public1 at gmail dot com ¶
12 years ago
Simple static library that allows easy manipulation of url parameters:
<?php
/**
* File provides easy way to manipulate url parameters
* @author Alexander Podgorny
*/
class Url {
/**
* Splits url into array of it's pieces as follows:
* [scheme]://[user]:[pass]@[host]/[path]?[query]#[fragment]
* In addition it adds 'query_params' key which contains array of
* url-decoded key-value pairs
*
* @param String $sUrl Url
* @return Array Parsed url pieces
*/
public static function explode($sUrl) {
$aUrl = parse_url($sUrl);
$aUrl['query_params'] = array();
$aPairs = explode('&', $aUrl['query']);
DU::show($aPairs);
foreach($aPairs as $sPair) {
if (trim($sPair) == '') { continue; }
list($sKey, $sValue) = explode('=', $sPair);
$aUrl['query_params'][$sKey] = urldecode($sValue);
}
return $aUrl;
}
/**
* Compiles url out of array of it's pieces (returned by explodeUrl)
* 'query' is ignored if 'query_params' is present
*
* @param Array $aUrl Array of url pieces
*/
public static function implode($aUrl) {
//[scheme]://[user]:[pass]@[host]/[path]?[query]#[fragment]
$sQuery = '';
// Compile query
if (isset($aUrl['query_params']) && is_array($aUrl['query_params'])) {
$aPairs = array();
foreach ($aUrl['query_params'] as $sKey=>$sValue) {
$aPairs[] = $sKey.'='.urlencode($sValue);
}
$sQuery = implode('&', $aPairs);
} else {
$sQuery = $aUrl['query'];
}
// Compile url
$sUrl =
$aUrl['scheme'] . '://' . (
isset($aUrl['user']) && $aUrl['user'] != '' && isset($aUrl['pass'])
? $aUrl['user'] . ':' . $aUrl['pass'] . '@'
: ''
) .
$aUrl['host'] . (
isset($aUrl['path']) && $aUrl['path'] != ''
? $aUrl['path']
: ''
) . (
$sQuery != ''
? '?' . $sQuery
: ''
) . (
isset($aUrl['fragment']) && $aUrl['fragment'] != ''
? '#' . $aUrl['fragment']
: ''
);
return $sUrl;
}
/**
* Parses url and returns array of key-value pairs of url params
*
* @param String $sUrl
* @return Array
*/
public static function getParams($sUrl) {
$aUrl = self::explode($sUrl);
return $aUrl['query_params'];
}
/**
* Removes existing url params and sets them to those specified in $aParams
*
* @param String $sUrl Url
* @param Array $aParams Array of Key-Value pairs to set url params to
* @return String Newly compiled url
*/
public static function setParams($sUrl, $aParams) {
$aUrl = self::explode($sUrl);
$aUrl['query'] = '';
$aUrl['query_params'] = $aParams;
return self::implode($aUrl);
}
/**
* Updates values of existing url params and/or adds (if not set) those specified in $aParams
*
* @param String $sUrl Url
* @param Array $aParams Array of Key-Value pairs to set url params to
* @return String Newly compiled url
*/
public static function updateParams($sUrl, $aParams) {
$aUrl = self::explode($sUrl);
$aUrl['query'] = '';
$aUrl['query_params'] = array_merge($aUrl['query_params'], $aParams);
return self::implode($aUrl);
}
}
?>
nirazuelos at gmail dot com ¶
12 years ago
Hello, for some odd reason, parse_url returns the host (ex. example.com) as the path when no scheme is provided in the input url. So I've written a quick function to get the real host:
<?php
function getHost($Address) {
$parseUrl = parse_url(trim($Address));
return trim($parseUrl[host] ? $parseUrl[host] : array_shift(explode('/', $parseUrl[path], 2)));
}
getHost("example.com"); // Gives example.com
getHost("http://example.com"); // Gives example.com
getHost("www.example.com"); // Gives www.example.com
getHost("http://example.com/xyz"); // Gives example.com
?>
You could try anything! It gives the host (including the subdomain if exists).
Hope it helped you.
jesse at example dot com ¶
11 years ago
@ solenoid: Your code was very helpful, but it fails when the current URL has no query string (it appends '&' instead of '?' before the query). Below is a fixed version that catches this edge case and corrects it.
<?php
function modify_url($mod)
{
$url = "http://".$_SERVER['HTTP_HOST'].$_SERVER['REQUEST_URI'];
$query = explode("&", $_SERVER['QUERY_STRING']);
if (!$_SERVER['QUERY_STRING']) {$queryStart = "?";} else {$queryStart = "&";}
// modify/delete data
foreach($query as $q)
{
list($key, $value) = explode("=", $q);
if(array_key_exists($key, $mod))
{
if($mod[$key])
{
$url = preg_replace('/'.$key.'='.$value.'/', $key.'='.$mod[$key], $url);
}
else
{
$url = preg_replace('/&?'.$key.'='.$value.'/', '', $url);
}
}
}
// add new data
foreach($mod as $key => $value)
{
if($value && !preg_match('/'.$key.'=/', $url))
{
$url .= $queryStart.$key.'='.$value;
}
}
return $url;
}
?>
need_sunny at yahoo dot com ¶
12 years ago
Thanks to xellisx for his parse_query function. I used it in one of my projects and it works well. But it has an error. I fixed the error and improved it a little bit. Here is my version of it:
<?php
// Originally written by xellisx
function parse_query($var)
{
/**
* Use this function to parse out the query array element from
* the output of parse_url().
*/
$var = parse_url($var, PHP_URL_QUERY);
$var = html_entity_decode($var);
$var = explode('&', $var);
$arr = array();
foreach($var as $val)
{
$x = explode('=', $val);
$arr[$x[0]] = $x[1];
}
unset($val, $x, $var);
return $arr;
}
?>
At the first line there was parse_query($val), I made it $var. It used to return a null array before this fix.
I have added the parse_url line. So now the function will only focus in the query part, not the whole URL. This is useful if something like below is done:
<?php
$my_GET = parse_query($_SERVER['REQUEST_URI']);
?>
pjpawel ¶
2 months ago
Unfortunately parse_url() DO NOT parse correctly urls without scheme or '//'. For example 'www.xyz.com' is consider as path not host:
Code:
<?php
var_dump(parse_url('www.xyz.com'));
?>
Output:
array(1) {
["path"]=>
string(10) "www.xyz.com"
}
To get better output change url to:
'//www.xyz.com' or 'http://www.xyz.com'
simbappo ¶
1 year ago
unset a query var from passed in or current URL:
function unsetqueryvar($var, $url=null) {
if (null == $url) $url = $_SERVER['REQUEST_URI'];
//mogrify to list
$url = parse_url($url);
$rq = [];
parse_str($url['query'], $rq);
unset($rq[$var]);
return $url['scheme'].$url['host'].$url['path'].'?'.http_build_query($rq).$url['fragment'];
}
vbrazas15 at gmail dot com ¶
1 year ago
My hamble improvements to the famouse `unparse_url` function by "thomas at gielfeldt dot com":
```php
/**
* @param array $parsedUrl -- result of the library `parse_url()` function
*
* @return string
*/
function unparseUrl(array $parsedUrl): string
{
// PHP_URL_SCHEME
$scheme = empty($parsedUrl[PHP_URL_SCHEME]) ? '' : (rtrim($parsedUrl['scheme'], ':/') . '://');
$user = empty($parsedUrl[PHP_URL_USER]) ? '' : rtrim($parsedUrl['user'], '@:');
$pass = empty($parsedUrl[PHP_URL_PASS]) ? '' : (':' . trim($parsedUrl['pass'], '@:'));
$pass = !$user ? '' : ($pass . '@');
$host = empty($parsedUrl[PHP_URL_HOST]) ? '' : rtrim($parsedUrl['host'], '/');
$port = empty($parsedUrl[PHP_URL_PORT]) ? '' : (':' . (int)ltrim($parsedUrl['port'], ':'));
$path = empty($parsedUrl[PHP_URL_PATH]) ? '' : ('/' . ltrim($parsedUrl['path'], '/'));
$host = ($host && !$port && !$path) ? $parsedUrl['host'] : $host;
$path = ($path && !$host && !$port) ? $parsedUrl['path'] : $path;
$query = empty($parsedUrl[PHP_URL_QUERY]) ? '' : ('?' . ltrim($parsedUrl['query'], '?'));
$fragment = empty($parsedUrl[PHP_URL_FRAGMENT]) ? '' : ('#' . ltrim($parsedUrl['fragment'], '#'));
return "$scheme$user$pass$host$port$path$query$fragment";
}
```
kibblewhite+php at live dot com ¶
1 year ago
This function 'parse_rebuild_url' will parse and reassemble your URL with new values provided by the 'overwrite_parsed_url_array' back together.
It is also possible to overwrite the URL components by key name and to merge or overwrite query parameters.
<?php
$test_url = 'http://usr:pss@example.com:81/mypath/myfile.html?a=b&b[]=2&b[]=3&z=9#myfragment';
$new_url_01_overwrite_query_params = parse_rebuild_url( $test_url, array(
'host' => 'new-hostname.tld',
'query' => array(
'test' => 'Hello World',
'a' => array( 'c', 'd' ),
'z' => 8
),
'fragment' => 'new-fragment-value'
), false );
$new_url_02_mergewith_query_params = parse_rebuild_url( $test_url, array(
'query' => array(
'test' => 'Hello World',
'a' => array( 'c', 'd' ),
'z' => 8
),
'fragment' => 'new-fragment-value'
), true );
function parse_rebuild_url( $url, $overwrite_parsed_url_array, $merge_query_parameters = true ) {
$parsed_url_array = parse_url( $url );
$parsed_url_keys_array = array(
'scheme' => null,
'abempty' => isset( $parsed_url_array['scheme'] ) ? '://' : null,
'user' => null,
'authcolon' => isset( $parsed_url_array['pass'] ) ? ':' : null,
'pass' => null,
'authat' => isset( $parsed_url_array['user'] ) ? '@' : null,
'host' => null,
'portcolon' => isset( $parsed_url_array['port'] ) ? ':' : null,
'port' => null,
'path' => null,
'param' => isset( $parsed_url_array['query'] ) ? '?' : null,
'query' => null,
'hash' => isset( $parsed_url_array['fragment'] ) ? '#' : null,
'fragment' => null
);
if ( isset( $parsed_url_array['query'] ) && $merge_query_parameters === true ) {
parse_str( $parsed_url_array['query'], $query_array );
$overwrite_parsed_url_array['query'] = array_merge_recursive( $query_array, $overwrite_parsed_url_array['query'] );
}
$query_parameters = http_build_query( $overwrite_parsed_url_array['query'], null, '&', PHP_QUERY_RFC1738 );
$overwrite_parsed_url_array['query'] = urldecode( preg_replace( '/%5B[0-9]+%5D/simU', '%5B%5D', $query_parameters ) );
$fully_parsed_url_array = array_filter( array_merge( $parsed_url_keys_array, $parsed_url_array, $overwrite_parsed_url_array ) );
return implode( null, $fully_parsed_url_array );
}
boctulus @ gmail co!m ¶
2 years ago
parse_url() does not parse some obvious errors so I made a complementary function
function url_check(string $url){
$sym = null;
$len = strlen($url);
for ($i=0; $i<$len; $i++){
if ($url[$i] == '?'){
if ($sym == '?' || $sym == '&')
return false;
$sym = '?';
}elseif ($url[$i] == '&'){
if ($sym === null)
return false;
$sym = '&';
}
}
return true;
}
}
Michael ¶
2 years ago
There's a quirk where this function will return the host as the "path" if there is a leading space.
<?php
$url = ' https://foobar.com:80/mypath/myfile.php';
print_r(parse_url($url));
/*
Array
(
[path] => https://foobar.com:80/mypath/myfile.php
)
*/
print_r(trim(parse_url($url)));
/*
Array
(
[scheme] => https
[host] => foobar.com
[port] => 80
[path] => /mypath/myfile.php
)
*/
?>
Anonymous ¶
4 years ago
This function will attempt to parse relative URLs but relaying on it can produce unexpected behavior that can cause some hard to track bugs. (The following results are obtained from PHP 5.5.19)
Attempting to parse a url like this
http://example.com/entities/GOA:98/?search=8989157d1f22
Correctly produces
<?php
array (
'scheme' => 'http',
'host' => 'example.com',
'path' => '/entities/GOA:98/',
'query' => 'search=8989157d1f22',
);
?>
However, Attempting to parse the relative URL
entities/GOA:98/?search=8989157d1f22
<?php
array (
'host' => 'entities',
'port' => 98,
'path' => '/GOA:98/',
'query' => 'search=8989157d1f22',
)
?>
If I change :98 to :A98 parse_url parses the URL correctly as
<?php
array (
'path' => 'entities/GOA:A98/',
'query' => 'search=8989157d1f22',
)
?>
Bottom line, Avoid using parse_url for relative urls unless you have tested the expected input and you know parse_url will handle them well.
https://forums.hawacastle.com/
Rob ¶
7 years ago
I've been working on a generic class that would make URI parsing / building a little easier.
The composer package is here: https://packagist.org/packages/enrise/urihelper
And the repository is here: https://github.com/Enrise/UriHelper
An example of the usage:
<?php
$uri = new \Enrise\Uri('http://usr:pss@example.com:81/mypath/myfile.html?a=b&b[]=2&b[]=3#myfragment');
echo $uri->getScheme(); // http
echo $uri->getUser(); // usr
echo $uri->getPass(); // pss
echo $uri->getHost(); // example.com
echo $uri->getPort(); // 81
echo $uri->getPath(); // /mypath/myfile.html
echo $uri->getQuery(); // a=b&b[]=2&b[]=3
echo $uri->getFragment(); // myfragment
echo $uri->isSchemeless(); // false
echo $uri->isRelative(); // false
$uri->setScheme('scheme:child:scheme.VALIDscheme123:');
$uri->setPort(null);
echo $uri->getUri(); //scheme:child:scheme.VALIDscheme123:usr:pss@example.com/mypath/myfile.html?a=b&b[]=2&b[]=3#myfragment
?>
admin at griefer1999 dot uhostfull dot com ¶
7 years ago
<?php
function url_parse($url){
$sflfdfldf=$url;
if(strpos($url,"?")>-1){
$a=explode("?",$url,2);
$url=$a[0];
$query=$a[1];
}
if(strpos($url,"://")>-1){
$scheme=substr($url,0,strpos($url,"//")-1);
$url=substr($url,strpos($url,"//")+2,strlen($url));
}
if(strpos($url,"/")>-1){
$a=explode("/",$url,2);
$url=$a[0];
$path="/".$a[1];
}
if(strpos($url,":")>-1){
$a=explode(":",$url,2);
$url=$a[0];
$port=$a[1];
}
$host=$url;
$url=null;
foreach(array("url","scheme","host","port","path","query") as $var){
if(!empty($$var)){
$return[$var]=$$var;
}
}
//return array("url"=>$sflfdfldf,"scheme"=>$scheme,"host"=>$host,"port"=>$port,"path"=>$path,"query"=>$query,"a"=>$url);
return $return;
}
?>
<?php
/* Compare two outputs */
//mine
print_r(url_parse("http://login.yahoo.com?.src=ym&.intl=gb&.lang=zh-Hans-HK&.done=https://mail.yahoo.com"));
//internal
print_r(parse_url("http://login.yahoo.com?.src=ym&.intl=gb&.lang=zh-Hans-HK&.done=https://mail.yahoo.com"));
?>
nospam at spellingcow dot com ¶
13 years ago
URL's in the query string of a relative URL will cause a problem
fails:
/page.php?foo=bar&url=http://www.example.com
parses:
http://www.foo.com/page.php?foo=bar&url=http://www.example.com
spam at paulisageek dot com ¶
14 years ago
In reply to adrian,
Thank you very much for your function. There is a small issue with your relative protocol function. You need to remove the // when making the url the path. Here is the new function.
function resolve_url($base, $url) {
if (!strlen($base)) return $url;
// Step 2
if (!strlen($url)) return $base;
// Step 3
if (preg_match('!^[a-z]+:!i', $url)) return $url;
$base = parse_url($base);
if ($url{0} == "#") {
// Step 2 (fragment)
$base['fragment'] = substr($url, 1);
return unparse_url($base);
}
unset($base['fragment']);
unset($base['query']);
if (substr($url, 0, 2) == "//") {
// Step 4
return unparse_url(array(
'scheme'=>$base['scheme'],
'path'=>substr($url,2),
));
} else if ($url{0} == "/") {
// Step 5
$base['path'] = $url;
} else {
// Step 6
$path = explode('/', $base['path']);
$url_path = explode('/', $url);
// Step 6a: drop file from base
array_pop($path);
// Step 6b, 6c, 6e: append url while removing "." and ".." from
// the directory portion
$end = array_pop($url_path);
foreach ($url_path as $segment) {
if ($segment == '.') {
// skip
} else if ($segment == '..' && $path && $path[sizeof($path)-1] != '..') {
array_pop($path);
} else {
$path[] = $segment;
}
}
// Step 6d, 6f: remove "." and ".." from file portion
if ($end == '.') {
$path[] = '';
} else if ($end == '..' && $path && $path[sizeof($path)-1] != '..') {
$path[sizeof($path)-1] = '';
} else {
$path[] = $end;
}
// Step 6h
$base['path'] = join('/', $path);
}
// Step 7
return unparse_url($base);
}
xellisx ¶
13 years ago
I need to parse out the query string from the referrer, so I created this function.
<?php
function parse_query($val)
{
/**
* Use this function to parse out the query array element from
* the output of parse_url().
*/
$var = html_entity_decode($var);
$var = explode('&', $var);
$arr = array();
foreach($var as $val)
{
$x = explode('=', $val);
$arr[$x[0]] = $x[1];
}
unset($val, $x, $var);
return $arr;
}
?>
solenoid at example dot com ¶
12 years ago
Here's a piece of code that modifies, replaces or removes the url query. This can typically used in paging situations where there are more parameters than the page.
<?php
function modify_url($mod)
{
$url = "http://".$_SERVER['HTTP_HOST'].$_SERVER['REQUEST_URI'];
$query = explode("&", $_SERVER['QUERY_STRING']);
// modify/delete data
foreach($query as $q)
{
list($key, $value) = explode("=", $q);
if(array_key_exists($key, $mod))
{
if($mod[$key])
{
$url = preg_replace('/'.$key.'='.$value.'/', $key.'='.$mod[$key], $url);
}
else
{
$url = preg_replace('/&?'.$key.'='.$value.'/', '', $url);
}
}
}
// add new data
foreach($mod as $key => $value)
{
if($value && !preg_match('/'.$key.'=/', $url))
{
$url .= '&'.$key.'='.$value;
}
}
return $url;
}
// page url: "http://www.example.com/page.php?p=5&show=list&style=23"
$url = modify_url(array('p' => 4, 'show' => 'column'));
// $url = "http://www.example.com/page.php?p=4&show=column&style=23"
?>
bramg dot net1 at gmail dot com ¶
3 years ago
this is my 404 error page is this ok or it need improvements
<?php
/**
* 404.php
*
* The template for displaying 404 pages (not found)
*
* @author BetterStudio
* @package Publisher
* @version 2.0.2
*/
get_header();
// Shows breadcrumb
if ( publisher_show_breadcrumb() ) {
Better_Framework()->breadcrumb()->generate( array(
'before' => '<div class="container bf-breadcrumb-container">',
'after' => '</div>',
'custom_class' => 'bc-top-style'
) );
}
?>
<div class="content-wrap">
<main <?php publisher_attr( 'content', '' ); ?>>
<div class="container layout-1-col layout-no-sidebar">
<div class="row main-section">
<div class="content-column content-404">
<div class="row first-row">
<div class="col-lg-12 text-404-section">
<p class="text-404 heading-typo">404</p>
</div>
<div class="col-lg-12 desc-section">
<h1 class="title-404"><?php publisher_translation_echo( '404_not_found' ); ?></h1>
<p><?php publisher_translation_echo( '404_not_found_message' ); ?></p>
<div class="action-links clearfix">
<script type="text/javascript">
if (document.referrer) {
document.write('<div class="search-action-container"><a href="' + document.referrer + '"><i class="fa fa-angle-double-right"></i> <?php publisher_translation_echo( '404_go_previous_page' ); ?></a></div>');
}
</script>
<div class="search-action-container">
<a href="<?php echo esc_url( home_url( '/' ) ); ?>"><i
class="fa fa-angle-double-right"></i> <?php publisher_translation_echo( '404_go_homepage' ); ?>
</a>
</div>
</div>
</div>
</div><!-- .first-row -->
<div class="row second-row">
<div class="col-lg-12">
<div class="top-line">
<?php get_search_form(); ?>
</div>
</div>
</div><!-- .second-row -->
</div><!-- .content-column -->
</div><!-- .main-section -->
</div> <!-- .layout-1-col -->
</main><!-- main -->
</div><!-- .content-wrap -->
<?php get_footer(); ?>
https://bramg.net
Anonymous ¶
4 years ago
Hello, for some odd reason, parse_url returns the host (ex. example.com) as the path when no scheme is provided in the input url. So I've written a quick function to get the real host:
<?php
function getHost($Address) {
$parseUrl = parse_url(trim($Address));
return trim($parseUrl[host] ? $parseUrl[host] : array_shift(explode('/', $parseUrl[path], 2)));
}
getHost("example.com"); // Gives example.com
getHost("http://example.com"); // Gives example.com
getHost("www.example.com"); // Gives www.example.com
getHost("http://example.com/xyz"); // Gives example.com
?>
You could try anything! It gives the host (including the subdomain if exists).
Hope it helped you.
https://vb.3dlat.com/
RobertVow ¶
8 months ago
Đổi thẻ cào sang tiền mặt, doi the cao thanh tien mat uy tín giá rẻ nhanh gọn rút tiền về atm và ví điện tử tự động 24/7,hỗ trợ hướng dẫn tích hợp api siêu ...
Doithenap.com - Đổi thẻ điện thoại thành tiền, Đổi thẻ cào thành ...https://doithenap.com
Anonymous ¶
4 years ago
To get the params (url query) as Associative array, use this function:
<?php
/**
* Returns the url query as associative array
*
* @param string query
* @return array params
*/
function convertUrlQuery($query) {
$queryParts = explode('&', $query);
$params = array();
foreach ($queryParts as $param) {
$item = explode('=', $param);
$params[$item[0]] = $item[1];
}
return $params;
}
?>
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
数据库
JAVA
面试
NoSQL
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
广告
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
adodb手册
ADORecordSet对象
opcache预加载
Composer的Packagist资源
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
mysql面试题
PHP json解析（json_decode）页面工具
纯php实现DES以及TripleDES加密算法
php 修改图片大小
两千行PHP学习笔记
支持php7的性能采集扩展
[原创]诡异的php-fpm超时问题
Packagist / Composer 中国全量镜像